【单选题】
关于经纬线的说法正确的是___
A. 以180°经线为界，东经和西经的度数分别向东、向西愈来愈大
B. 以0°经线为界，东经和西经的度数分别向东、向西愈来愈小
C. 以赤道为界，北纬和南纬的度数分别向北、向南愈来愈大
D. 以赤道为界，南、北纬的度数分别向南、向北愈来愈小，到北极和南极点时，为0°
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
我国领土最东端在 ___
A. 黑龙江省
B. 海南省
C. 广东省
D. 上海市
【单选题】
我国纬度最高和最低的省区是 ___
A. 黑龙江和广东
B. 黑龙江和海南
C. 新疆和台湾
D. 内蒙古和海南
【单选题】
北回归线自西向东依次穿过的省区是 ___
A. 云南、广西、广东、台湾
B. 云南、广西、福建、台湾
C. 台湾、广东、广西、云南
D. 云南、广东、福建、台湾
【单选题】
下列省级行政区中，哪个不是位于边疆 ___
【单选题】
下列各组山脉，由南向北的正确排序是___
A. 大兴安岭、阴山、秦岭、巫山
B. 南岭、大别山、祁连山、天山
C. 喜马拉雅山、秦岭、武夷山
D. 阿尔泰山、阴山、巴颜喀拉山
【单选题】
我国四大盆地中，纬度位置最高的是___
A. 塔里木盆地
B. 准噶尔盆地
C. 柴达木盆地
D. 四川盆地
【单选题】
新疆地形有“三山夹两盆”之说，下列不属于三山的是___
A. 天山
B. 昆仑山
C. 阿尔泰山
D. 祁连山
【单选题】
下图中的①～④所代表的山脉分别是___
A. 阴山 昆仑山 秦岭 南岭
B. 天山 昆仑山 秦岭 南岭
C. 昆仑山 天山 阴山 秦岭
D. 天山 阴山 昆仑山 南岭
【单选题】
公元589年，隋朝全国，在这一过程中，隋朝灭掉的最后一个政权是
【单选题】
史书记载：古今称国计之富者莫如隋。隋朝繁荣强盛的原因是
①国家统一②人口增长③经济繁荣④隋文帝励精图治
A. ①②③④
B. ①④
C. ②③
D. ②③④
【单选题】
“他在位期间成功地统一了西晋末年以来近300年的分裂局面，改革制度，发展生产，注重吏治.国家安定。人民负担较轻，经济繁荣。”他在1978年美国学者麦克·哈特所著的《影响人类历史进程的100名人排行榜》中排行第82位。这位在西方人眼中影响深远的中国皇帝是
A. 秦始皇
B. 汉武帝
C. 隋文帝
D. 汉文帝
【单选题】
宋朝李纲曾高度评价隋文帝，“混南北为一区”的历史功绩。他认为隋文帝“有雄才大略.过人之聪明。其所建立.又有卓然出于后世者”。李纲的评价反映了隋文帝一生的最大功绩是
A. 加强中央集权
B. 实现国家统一
C. 开通大运河
D. 促进社会经济发展
【单选题】
隋唐时期.某商人把一批牡丹花从洛阳沿运河运到余杭，依次经过的河段有（ ）
①通济渠 ②永济渠 ③邗沟 ④江南河
A. ①②③④
B. ④①②
C. ①②③
D. ①②
【单选题】
唐朝杜佑所撰《通典》中记载；“隋炀帝大业元年，更令开导，名通济渠。西通河洛，南达江淮。……运漕商旅，往来不绝。”这段史料体现了隋朝大运河开通的主要作用是（ ）
A. 促进南北经济文化交流
B. 提高了隋朝的造船技术
C. 使得b了隋炀帝巡游玩乐
D. 结束了南北分裂局面。
【单选题】
有人说，秦朝和隋朝是两个非常相似的王朝。下列属于两者的相同点的是（ ）
①都结末了分裂局面；②灭亡的根本原因都是暴政；
③存在时间都较为短暂，都是两世而亡；④都曾留下了举世闻名的工程；⑤都通过科举制度选拔官员。
A. ①②③④
B. ②③④⑤
C. ①②③⑤
D. ①②③④⑤
【单选题】
古代的日本、朝鲜等国仿照我国的科举制度选任官员，近代西方文官制度的产生也借鉴了我国科举制度的一些办法。这些主要说明（ ）
A. 朝鲜、日本的政治制度落后
B. 科举制度有利于人才的选拔
C. 隋唐时期中国领先于全世界。
D. 科举制度优于西方三权分立
【单选题】
有学者认为科举制所体现的许多有价值的观念具有永久的生命力……成为人类共同的基本理念。科举制“具有永久的生命力”主要是指（ ）
A. 平等竞争
B. .注重实践
C. .分科考试
D. 以德取才
【单选题】
成语“罄竹难书”出自《旧唐书·李密传》：“罄南山之竹，书罪未穷；决东海之波，流恶难尽。”这是李密(隋末农民起义的领袖)为声讨哪一人物而写的（ ）
A. 隋文帝
B. 隋炀帝
C. 秦始皇
D. 秦二世
【简答题】
材料一：魏晋时创立九品中正制，由中央特定官员，按出身、品德等考核民间人才，分为九品录用。但魏晋时代，世族势力很大，常影响中正官考核人才，后来甚至所凭准则仅限于门第出身。于是造成“上品无寒门，下品无世族”的现象。
材料二：隋炀帝大业三年（607年）四月，诏令文武官员有职事者，可以“孝悌有闻”“德行敦厚”“结义可称”“文才秀美”等10科举荐人才。……大业年间，隋炀帝还设置明经、进士二科，并以“试策”取士。
11、⑴材料一所提及魏晋时选官的主要依据是什么？你认为这种方法有什么弊端？
⑵材料二中的这种选官方法是什么制度？与材料一中制度的相比哪种更好？请说明你的理由。
【判断题】
当M和N离子时，EDTA能准确滴定M的条件是c(M)K’MY/c(N)K’NY≥106。
【判断题】
在Bi3+、Fe3+共存的溶液中，测定Bi3+时，应加入三乙醇胺消除Fe3+干扰。
【判断题】
用酸度提高配位滴定的选择性时，选择酸度的一般原则是：被测离子的最小允许pH值<pH<干扰离子的最小允许pH值。
【判断题】
配位滴定中使用氢化物作掩蔽剂时应注意先将溶液调节为碱性后再加入。
【判断题】
配位滴定中与EDTA反应较慢或对指示剂有封闭作用的金属离子一般应采用返滴定法进行滴定。
【判断题】
配位滴定中，铅铋混合液中Pb2+、Bi3+的含量可通过控制酸度进行连续滴定。
【判断题】
利用配位滴定测定无机盐中的SO42-时，加入定量过量的BaCl2溶液，是生成BaSO4沉淀，剩余的Ba2+用EDTA标准溶液滴定，则有n(SO42-)=n(Ba2+);n(Ba2+)=n(EDTA)。
【判断题】
在测定水中微量的钙时，加入EDTA的目的是避免Mg2+的干扰。
【判断题】
二甲酚橙最适用于EDTA滴定钙镁总量。
【判断题】
在选择配位滴定的指示剂时，应注意指示剂-金属离子配合物与EDTA-金属离子配合物的稳定关系为 ，避免产生指示剂的封闭与僵化现象。
【判断题】
在流相色谱分析中，一般应根据待测物的性质选择相应的色谱分离柱。
【判断题】
紫外/可见检测器是高效液相色谱分析中常用的检测器，属于通用型检测器。
【判断题】
高效液相色谱法分析结束后，对于常用的Ｃ18烷基键合硅胶柱，应以纯甲醇代替流动相（特别是含有缓冲盐组分的流动相）继续走柱20min，以保护高压输液泵及色谱柱。
【判断题】
在液相色谱法中在常规分析中正相色谱法应用比反相色谱法广。
【判断题】
在液相色谱法中在常规分析中反相色谱法应用比正相色谱法广。
【判断题】
应用比重瓶法测定密度，比重瓶水值的测定对试验结果有影响，其测定周期固定。
【判断题】
使用气柱平衡式密度测定仪时，为了防止异常情况的发生，干燥泵在湿度不符合要求时应连接干燥器。
【判断题】
韦氏天平法，当重锤上粘污物质后会使测定值偏高。
【判断题】
测熔点时载热体的选择应选用沸点等于被测物全熔的最高温度，减少载热液的挥发，而且性能稳定，清澈透明、黏度小的液体。
【判断题】
安装沸点测定装置时，将三口圆底烧瓶、试管、测量温度计以及胶塞连接，测量温度计下端在试管液面任意部位，不会引起大的测定误差。
推荐试题
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
