【单选题】
220.(A320)当加油管路油滤堵塞时,发生什么?___
A. A.液压油旁通过油滤
B. B.液压油被阻止,不能加油
C. C.加油压力需提高.
D.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【单选题】
222.(A320)地面发动机开车前,蓝电动泵电门处于自动位且飞机有电供应时,蓝泵:___
A. A.自动工作
B. B.蓝泵超控按钮按下时工作
C. C.操作货舱门时自动工作
D. D.一直不工作
【单选题】
223.(A320)地面蓝电动泵电门置AUTO位,蓝电动泵何时工作?___
A. A.一个电瓶置于UTO时
B. B.地面电源接通时
C. C.一台发动机工作或蓝泵超控按钮按下时
D. D.此时已在工作
【单选题】
224.(A320)动力转换组件(PTU)可将液压力:___
A. A.在蓝和黄系统间互相转换
B. B.由绿系统单向转换给黄系统
C. C.在绿和黄系统间互相转换
D. D.由黄系统单向转换给绿系统
【单选题】
225.(A320)动力转换组件设在AUTO位,何时自动工作?___
A. A.失去蓝系统时
B. B.绿和黄系统压差大于500PSI时
C. C.只要探测到绿和黄系统之间有压差
D. D.两台发动机都起动好后
【单选题】
226.(A320)二号发动机驱动:___
A. A.蓝系统
B. B.绿系统
C. C.如果绿系统泵故障,通过动力转换组件驱动黄系统泵和绿系统
D. D.蓝系统和绿系统
【单选题】
227.(A320)防火关断valve关断:___
A. A.蓝和黄系统
B. B.黄和绿系统
C. C.绿和蓝系统
D. D.绿,蓝和黄系统
【单选题】
228.(A320)飞行中,冲压空气涡轮如何放出?___
A. A.只能人工
B. B.人工或自动
C. C.只能自动
D. D.不能放出
【单选题】
229.(A320)飞行中,冲压空气涡轮自动放出时:___
A. A.蓝液压系统增压,但应急发动机不工作
B. B.绿液压系统增压,且应急发电机工作
C. C.蓝液压系统增压且应急发动机工作
D. D.绿液压系统增压,但应急发动机不工作
【单选题】
230.(A320)飞行中,蓝电动泵失效,蓝系统供压:___
A. A.失效
B. B.可由冲压空气涡轮(RAT)恢复
C. C.可由动力转换组件(PTU)恢复
D. D.B和C都对
【单选题】
231.(A320)飞行中,蓝液压系统可由谁供压?___
A. A.冲压空气涡轮和电动泵
B. B.发动机泵
C. C.动力转换组件
D. D.无法供压
【单选题】
232.(A320)飞行中能否收上冲压空气涡轮?___
【单选题】
233.(A320)黄系统包括:___
A. A.一个发动机泵,一个电动泵,一个手摇泵
B. B.一个发动机泵,两个电动泵
C. C.一个发动机泵,一个手摇泵和冲压空气涡轮
D. D.一个发动机泵,一个电动泵,一个空气驱动泵
【单选题】
234.(A320)黄系统操纵:___
A. A.反推1
B. B.反推2
C. C.上述两者
D.
【单选题】
235.(A320)黄系统供压给:___
A. A.左和右升降舵
B. B.仅仅左升降舵
C. C.B仅仅右升降舵
D. D.以上都不对
【单选题】
236.(A320)黄系统供压给:___
A. A.襟翼
B. B.襟翼和缝翼
C. C.缝翼
D. D.以上都不对
【单选题】
237.(A320)黄系统可由谁增压?___
A. A.1号发动机液压泵
B. B.2号发动机液压泵,或黄电动泵,或动力转换组件
C. C.2号发动机液压泵,或黄电动泵,或冲压空气涡轮
D. D.黄系统空气驱动泵
【单选题】
238.(A320)黄系统面板内的手摇泵用于:___
A. A.增压油箱
B. B.操纵舵面
C. C.操作货舱门
D. D.给油箱加油
【单选题】
239.(A320)火警关断valve何时关闭:___
A. A.主电门置OFF位时
B. B.火警按钮按出时
C. C.如果探测到火警,自动关闭
D. D.任何时候都不能关闭
【单选题】
240.(A320)驾驶舱没有接通电源时能否操作货舱门:___
A. A.能,只要接通勤务电源
B. B.不能
C. C.如电瓶有电,可由热汇流条供电
D. D.可以用摇把人工转动开关
【单选题】
241.(A320)减载功能储压器为哪些部件供压?___
A. A.所有液压部件
B. B.减载功能舵面
C. C.缝翼/襟翼
D. D.升降舵
【单选题】
242.(A320)壳体回油滤的作用___
A. A.壳体回油到油箱前除去油液中的杂质
B. B.检查液压泵的状况
C. C.A和B
D. D.以上说法都不对
【单选题】
243.(A320)可否在空中收回冲压涡轮?___
【单选题】
244.(A320)蓝系统电动泵什么时候工作?___
A. A.只需一台大发工作
B. B.只需蓝系统超控电门ON位。
C. C.蓝系统电动泵AUTO位,APU供电且前起减震支柱未压缩。
D. D.蓝系统超控电门ON位且一台大发工作。
【单选题】
245.(A320)蓝系统供压给:___
A. A.襟翼
B. B.缝翼
C. C.襟翼和缝翼
D. D.以上都不对
【单选题】
246.(A320)绿系统操纵:___
A. A.扰流板3
B. B.扰流板2和4
C. C.扰流板1和5
D. D.扰流板2和3
【单选题】
247.(A320)绿系统操纵:___
A. A.反推1
B. B.反推2
C. C.上述两者
D.
【单选题】
248.(A320)哪些液压系统由发动机驱动泵供压?___
A. A.蓝系统和绿系统
B. B.蓝系统和黄系统
C. C.蓝系统,绿系统和黄系统
D. D.绿系统和黄系统
【单选题】
249.(A320)能否在绿系统和黄系统之间交换液压油:___
A. A.不能
B. B.能,通过动力转换组件
C. C.能,通过反推系统
D. D.能,通过刹车系统
【单选题】
250.(A320)如果蓝电动泵故障,当冲压空气涡轮人工接通按钮按下时:___
A. A.蓝液压系统由冲压空气涡轮增压
B. B.应急发电机供电
C. C.蓝液压系统增压且应急发电机工作
D. D.动力转换组件(PTU)向蓝系统供压
【单选题】
251.(A320)如果失去黄系统,缝翼操纵:___
A. A.正常
B. B.变慢
C. C.失去
D.
【单选题】
253.(A320)如果失去绿系统,襟翼操作:___
A. A.变慢
B. B.正常
C. C.失去
D.
【单选题】
548.(A320)在什么情况下,冲压空气涡轮自动放出:___
A. A.失去交流汇流条1和2且速度大于100节
B. B.蓝电动泵故障
C. C.只能人工放出
D. D.蓝泵供压低于1750PSI
【单选题】
734.(A320)黄系统供压给:___
A. A.左和右升降舵
B. B.仅仅左升降舵
C. C.仅仅右升降舵
D. D.以上都不对
【单选题】
890.(A320)地面蓝电动泵电门置AUTO位,蓝电动泵何时工作?___
A. A.一个电瓶置于AUTO时
B. B.地面电源接通时
C. C.一台发动机工作或蓝泵超控按钮按下时
D. D.此时已在工作
【单选题】
965.(A320)系统输出低压设定是___
A. A.1350
B. B.1400
C. C.1450
D. D.1500
【单选题】
966.(A320)以下那种故障会点亮红色主警告灯?___
A. A.绿系统EDP输出低压
B. B.黄系统油箱过热
C. C.RAT故障
D. D.绿和黄系统低压
【单选题】
967.(A320)LAF储压器提供压力至___?___
A. A.所有操纵面
B. B.LAF操纵面
C. C.襟/缝翼
D. D.副翼
【单选题】
968.(A320)假如飞机前顶点被顶起,此时飞机由APU提供电源,蓝系统电动泵电门在AUTO位,此时,泵是否会自动工作?___
【单选题】
储压器预充压力是:___
A. A.3000PSI
B. B.1885PSI
C. C.低于3000PSI的任意值
D. D.没有必要预充
【单选题】
液压油箱增压主要由哪里供气?___
A. A.左发
B. B.右发
C. C.APU
D. D.气源总管
推荐试题
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
An administrator needs to verify that vMotion operations can be performed in a vSphere data center.What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed? ___
A. 50ms RTT
B. 100ms RTT
C. 150ms RTT
D. 200ms RTT
【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
【单选题】
An administrator is attempting to enable Storage I/O Control on a datastore, but it is failing. What is the likely reason for this failure? ___
A. The host is connected to a datastore is running on ESX 4.0.
B. The host is connected to a Fibre Channel storage array.
C. The datastore has multiple extents.
D. The datastore is managed by a single vCenter Server.