【单选题】
《消防培训手册》应以 语言写成。
A. 船上工作语言;
B. 如其所用语言不是英文或法文,则应包括其中一种语言的译文;
C. 船长或高级船员的工作语言;
D. 有关描述应以主管机关要求的一种或几种文字写成,如其所用语言不是英文或法文,则应包括其中一种语言的译文。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【单选题】
下列处所不属于控制站的是 。
A. 驾驶室
B. 消防控制站
C. 舵机间
D. 海图室
【单选题】
水密舱壁上的所有滑动门和铰链门都应设有指示器,在 应显示这些门是否处于关闭状态。
A. 驾驶台
B. 船员舱室
C. 集控室
D. 船长室
【单选题】
1000总吨及以上船舶的A类机器处所,应设有 条脱险通道。
【单选题】
散货船隔舱装载时对 影响最大。
A. 船舶强度
B. 船舶耐波性
C. 船舶快速性
D. 船舶稳性
【单选题】
应急电源应保证在必要的条件下向下列地点供电,其中错误的是 。
A. 救生登乘地点;
B. 控制站;
C. 应急配电板;
D. 船员房间。
【单选题】
为了保证部分舱室失火时消防管路保持足够的压力,在消防总管上设置下列装置 。
A. 应急吸入阀
B. 遥控速闭阀
C. 隔离阀
D. 三通阀
【单选题】
一般情况下,国际航行客船的弃船和消防演习应在 时间内进行一次。
【单选题】
货船气胀式救生筏的有效期为一年,到期应进行检验。合理情况下主管机关可展期 。
A. 3个月
B. 5个月
C. 9个月
D. 12个月
【单选题】
船首距艇筏存放位置大于____米时,船首应增设一只救生筏。
A. 60
B. 80
C. 100
D. 120
【单选题】
若有 以上的船员未参加该船前一个月的弃船和消防演习,应在该船离港后24 小时内举行这两项演习。
A. 20%
B. 25%
C. 30%
D. 35%
【单选题】
救助艇在载足全部乘员及属具时的中等海况下的回收时间应不超过 。
【单选题】
救生艇筏应可在纵倾至_ __和任何一舷横倾至__ _的不利情况下直接从存放地点降落下水。
A. 10° 20°
B. 5° 15°
C. 10° 15°
D. 5° 20°
【单选题】
所有救助艇均应能在船舶于平静水面上前进航速达到____时降落,如必要可用艇首缆。
A. 3kn
B. 4kn
C. 5 kn
D. 6 kn
【单选题】
降落所用的吊艇索应定期检查,要特别注意穿过滑轮的区域,并在由于吊艇索磨损而需要换新时或按不超过 的间隔期(取早者)予以换新。
【单选题】
1000总吨及以上国际航行的货船,所需的消防水带数目应为___米船长设1根,备用1根。
A. 10M
B. 20M
C. 30M
D. 15M
【单选题】
ISM规则是以公约修正案的形式被引入 ,作为公约附则新增章节,从而成为强制性规则。( )
A. MARPOL公约
B. STCW公约
C. SOLAS公约
【单选题】
从事非短程国际航行的客船应配备封闭式或半封闭式救生艇,其在每舷的总容量应能容纳不少于船上人员总数的( )。
A. 50%
B. 60%
C. 70%
D. 100%
【单选题】
以下哪条不属于ISM规则明确规定的船长责任 。( )
A. 执行公司的安全和环境保护方针
B. 确保船舶有足够的资源
C. 以简明方式发布相应的命令和指令 D、核查具体要求的遵守情况
【单选题】
载货高速船应不迟于 适用ISM规则?( )
A. 1998年7月1日
B. 2000年12月31日
C. 2002年7月1日
D. 2003年12月31日
【单选题】
如果SMC仅进行一次中间审核,则应在什么时间进行 。
A. SMC的第二个周年日的前后3个月内;
B. SMC的第二、三个周年日之间;
C. DOC的第二、三个周年日之间;
D. DOC的第二个周年日的前后3个月内。
【单选题】
公司应当保证船上人员在履行其涉及安全管理体系职责时能够 交流。
【单选题】
公司应建立 的程序,以对船舶和设备的维护方式方法提出具体的措施。
A. 合理化
B. 制度化
C. 文件化
D. 口头
【单选题】
公司实施检查的人员应是 的船员或岸上人员。
A. 有管理能力
B. 一般
C. 公司制定
D. 适任和有经验
【单选题】
根据《国际高速船安全规则》(2000年), 总吨及以上客船必须装备航行数据记录仪(VDR)。
A. 2000
B. 1000
C. 500
D. 不管其大小
【单选题】
固体散装货物中,C组货物是指( )
A. 易流态化物质
B. 具有化学危险性的物质
C. 既不易流态化也不具有化学危险的物质
D. 既易流态化又具有化学危险性的物质
【单选题】
按照散固规则,那些运输时会使船舶产生危险局面的具有化学危险的货物属于( )
【单选题】
按照散固规则,那些运输时的水分含量超过适运水分极限可能会流态化的货物属于( )
【单选题】
包装危险货物系指 所包含的物质、材料和物品。
A. IMDG规则
B. BC规则
C. BLU规则
D. IMSBC规则
【单选题】
在装有危险货物的包件上粘贴标志或标志图案,应做到使其在海水中至少浸泡( )个月后其标志或标志图案仍清晰可辨。
【单选题】
《国际危规》规定,装有危险货物或危险货物残余物集装箱、半挂车或可移动罐柜的标牌,须按下列( )方式清楚地显示标牌:
A. 每侧
B. 每端
C. 每侧和每端
D. 每侧或每端
【单选题】
以下哪个证书是化学品船特有的:( )
A. 适航证书
B. 适装证书
C. 防止油污证书
D. 燃油污染损害民事责任保险证书或其他财务保证证书
【单选题】
应急消防泵的燃油柜所盛燃油在该泵全负荷下至少运行 。
【单选题】
《国际消防安全系统规则》要求,在客船上,海水泵及自动失火报警和探火系统的动力源不少于___套。
【单选题】
STCW78/95公约不适用于在下列哪些船舶上服务的船员:
A. 客船;
B. 营业性的游艇;
C. 渔船;
D. 工程船。
【单选题】
地方性法规可以制定的事项( )
A. 行政管理制度
B. 非国有财产的征收
C. 县一级人民政府的产生、组织和职权
D. 基层群众自治制度
【单选题】
全国人大授权国务院对部分应由法律制定的事项先制定行政法规,行政法规可以制定的是( )
A. 有关犯罪和刑罚
B. 对公民政治权利的剥夺
C. 限制人身自由的处罚
D. 基本经济制度
【单选题】
关于授权立法,下列表述错误的是( )
A. 被授权机关应当严格按照授权目的行使权力
B. 被授权机关不得将该项权力转授其他机关
C. 法律制定后,相应立法事项的授权终止
D. 被授权的机关可以根据授权的范围自主行使权力
【单选题】
我国法律案的表决中计票基数是( )
A. 到会代表人数
B. 法定代表人数
C. 实际参加投票人数
D. 参加会议的人数
【单选题】
《公务员法》对公务员的范围重新做了界定,根据规定公务员必须具备三个条件,其中( )是公务员最本质的特征
A. 依法履行公职
B. 纳入国家行政编制
C. 由国家财政负担工资福利
D. 公务员的职务行为受法律保护
推荐试题
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.