刷题
导入试题
【单选题】
安全生产“三同时”制度是指建设项目的安全设施,必须与主体工程___。
A. 同时设计,同时施工,同时竣工验收
B. 同时设计,同时施工,同时投入使用
C. 同时论证,同时评价,同时投资
D. 同时投资,同时施工,同时评价
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
施工单位每年至少对管理人员和作业人员进行___次安全生产教育培训,其教育培训情况记人个人工作档案。
A. 1
B. 2
C. 3
D. 5
【单选题】
当从业人员发现直接危及人身安全的紧急情况时,有权停止作业或在采取可能的应急措施后撤离作业场所,这里的权是___。
A. 拒绝权
B. 批评权和检举、控告权
C. 紧急避险权
D. 自我保护权
【单选题】
在正常使用条件下,以下关于建设工程最低保修期限的规定,符合《建设工程质量管理条例》规定的是___。
A. 基础设施工程、房屋建筑的地基基础和主体结构工程为50年
B. 屋面防水工程、有防水要求的房间和外墙面的防渗漏为5年
C. 电气工程、给排水工程为2年
D. 地基基础和主体工程为永久
【单选题】
下列因素中,导致建设工程物资采购合同质量纠纷的成因是___。
A. 物资使用不当
B. 现场管理不善
C. 到货验收不严、不及时
D. 供货期间价格变动
【单选题】
《建设工程质量管理条例》规定:工程完工后,应当由___组织设计、施工等有关单位进行竣工验收,该单位在项目建设过程中处于核心地位。
A. 质量监督站
B. 建设单位
C. 监理单位
D. 建设行政主管部门
【单选题】
某施工现场运来一批拟用于装修的石料,对于这批石料的检查,下列说法正确的是___。
A. 对石料质量的检查是监理工程师的责任,施工单位不需要检查
B. 对石料质量的检查是施工单位的责任,监理工程师不需要检查
C. 如果石料的厂家出示了产品合格证和质量检验报告,就不需要对其进行检查
D. 对石料的检查取样应该在监理工程师的监督下取样
【单选题】
工程开工前,设计单位要到施工现场给施工等单位进行设计交底,按《建设工程质量管理条例》的要求,此时用于交底的图纸应是___。
A. 经施工图设计审查中心审查合格的
B. 经设计院总工审查合格的
C. 经建设单位认可的
D. 经注册建筑师、结构工程师签字,设计院盖章的
【单选题】
施工人员对涉及结构安全的试块、试件取样时___。
A. 应在建设单位的监督下取样,并送交监理人员检测
B. 应在监理人员的监督下取样,并送交建设单位检测
C. 应在设计单位的监督下现场取样,并送具有相应资质等级的质量检测单位进行检测
D. 应在监理单位监督下现场取样,并送具有相应资质等级的质量检测单位进行检测
【单选题】
根据《建设工程质量管理条例》关于质量保修制度的规定,电气管线、给排水管道、设备安装和装修工程的最低保修期为___。
A. 6个月
B. 1年
C. 2年
D. 5年
【单选题】
工程监理人员发现工程设计不符合工程质量标准或合同约定的质量要求的,___。
A. 有权要求设计单位改正
B. 无权要求设计单位改正
C. 应当报告建设单位要求设计单位改正
D. 应当通知设计单位改正
【单选题】
《工程建设标准强制性条文》是设计或施工时___。
A. 重要的参考指标
B. 必须绝对遵守的技术法规
C. 必须绝对遵守的管理标准
D. 必须绝对遵守的工作标准
【单选题】
建设工程纠纷涉及到的___问题,一般需要进行鉴定。
A. 合同工期
B. 付款方式
C. 工程质量
D. 违约责任
【单选题】
在某工程施工合同中约定,建设单位负责设备采购工作。在该项工程竣工验收交付使用10天后,生产中出现设备问题,属于___情况的,施工单位应予无偿保修。
A. 设计失误
B. 设备使用不当
C. 设备制造缺陷
D. 施工质量低劣
【单选题】
因建设单位(含监理单位)错误管理而造成的质量缺陷,由施工单位负责维修,其经济责任由___承担。
A. 监理单位
B. 施工单位
C. 建设单位
D. 设计单位
【单选题】
有关建设工程竣工环保验收部门的叙述中,不正确的是___。
A. 环境保护设施竣工验收,应当与主体工程竣工验收分开进行
B. 分期建设、分期投入生产或者使用的建设项目,其相应的环境保护设施应当分期验收
C. 环境保护行政主管部门应自收到环境保护设施竣工验收申请之日起30日内,完成验收
D. 建设项目需要配套建设的环境保护设施经验收合格,该建设项目方可正式投入生产或者使用
【单选题】
某房屋建筑工程于2009年3月15日通过竣工验收,建设单位于2009年3月31 日办理了竣工验收备案手续。按照《建设工程质量管理条例》的规定,该工程电气管线的最低保修期限截止日期是___。
A. 2011年3月15日
B. 2011年3月31日
C. 2013年3月15日
D. 2013年3月31日
【单选题】
根据《建设工程质量管理条例》的规定,施工单位在施工过程中发现设计文件和图纸有差错的,应当___。
A. 可直接对设计文件和图纸修改
B. 及时提出意见和建议
C. 直接找设计单位改正
D. 对误差很小的可以不予理会
【单选题】
某高层住宅工程结构设计合理,使用年限50年。屋面防水是一级,设计使用年限15年,工程于2010年8月5 日竣工验收合格,施工单位出具的质量保修书中有下面的内容,其中不符合法律法规要求的是___。
A. 电气管线、给水排水管道、装修工程为1年
B. 屋面防水工程为7年
C. 有防水要求的卫生间,厨房为5年
D. 基础工程为50年
【单选题】
下列对工程建设标准有关内容的理解,正确的是___。
A. 推荐性标准在任何情况下,都没有法律约束力
B. 概算定额不属于工程建设标准范围
C. 违反工程建设强制性标准,但没有造成严重后果的,不属于违法行为
D. 建设行政主管部门可依据《工程建设强制性条文》对责任者进行处罚
【单选题】
建设项目的水污染防治设施,应当与主体工程同时设计、同时施工、同时投入使用。水污染防治设施应当经过___,验收不合格的,该建设项目不得投入生产或者使用。
A. 环保部门的验收
B. 国务院的批准
C. 省级行政部门的验收
D. 各级环保部门的验收
【单选题】
建设行政主管部门或者其他有关部门发现建设单位在竣工验收过程中违反国家有关建设工程质量管理规定行为的,责令停止使用,___。
A. 报上级主管部门验收
B. 重新检查施工质量
C. 重新组织竣工验收
D. 根据《建设工程质量管理条例》有关规定进行处理
【单选题】
某大型建设工程项目竣工后,建设单位于2005年4月1日向环境保护行政主管部门申请配套建设的环境保护设施竣工验收,环境保护行政主管部门于2005年4月5日收到申请。则环保行政主管部门完成该设施验收的截止日期为___。
A. 2005年4月20日
B. 2005年5月5日
C. 2005年5月20日
D. 2005年6月5日
【单选题】
由于发包人原因导致工程无法按规定期限进行竣(交)工验收的,在承包人提交竣(交)工验收报告___d后,工程自动进入缺陷责任期。
A. 30
B. 45
C. 60
D. 90
【单选题】
发包人根据确认的竣工结算报告向承包人支付工程竣工结算价款,保留___左右的质量保证(保修)金,待工程交付使用1年质保期到期后清算(合同另有约定的,从其约定),质保期内如有返修,发生费用应在质量保证(保修)金内扣除。
A. 1%
B. 5%
C. 10%
D. 20%
【单选题】
甲建筑公司是一家施工总承包企业,2009年1月承揽了某住宅小区的施工任务。在施工过程中,并没有按照审查合格的设计文件和建筑节能标准进行施工。2010年7月,却轻松通过了建设单位的验收。后来经群众举报,在有关部门的检查下被曝光。对于此次事件,不应当承担法律责任的是___。
A. 建设单位
B. 施工总承包单位
C. 设计单位
D. 监理单位
【单选题】
某工程项目于2010年3月1日开始试运行,建设单位申请该工程项目配套建设的环境保护设施竣工验收的最后时限为___。
A. 2010年4月1日
B. 2010年6月1日
C. 2010年9月1日
D. 2010年12月1日
【单选题】
建设单位相关的质量责任和义务不包括___。
A. 依法进行装修工程
B. 依法向有关单位提供原始资料
C. 限制不合理的干预行为
D. 依法承揽工程的勘察、设计业务
【单选题】
甲建筑公司计划于2010年3月7日浇筑混凝土,由于现场施工场地原因,甲建筑公司决定购买商品混凝土进行施工,对此下面的说法正确的是___。
A. 商品混凝土必须要有出厂合格证,施工单位不需要对此进行检验
B. 施工单位需要对此商品混凝土进行检验,但是可以自行取样
C. 施工单位需对此商品混凝土进行检验,同时要在监理单位和建设单位的监督下现场取样
D. 施工单位需对此商品混凝土进行检验,接受委托的检验单位必须要具有相应的资质等级
【单选题】
某工程已具备竣工条件,2010年7月2 日施工单位向建设单位提交竣工验收报告,2010年7月7 日经验收不合格,施工单位返修后于2010年7月20 日再次验收合格,2010年7月31 日,建设单位将有关资料报送建设行政主管部门备案,则该工程质量保修期自___开始。
A. 2010年7月2日
B. 2010年7月7日
C. 2010年7月20日
D. 2010年7月31日
【单选题】
甲施工单位于2009年5月20日签订一份施工合同,承建工程为五层砖混结构,七级抗震设防,施工图通过审批。工程于2009年10月8日开工建设,施工中技术人员发现图纸中有一处抗震设计差错,此时甲施工企业应当___。
A. 按原图纸继续施工
B. 与监理工程师协商一致后,继续施工
C. 及时提出意见和建议
D. 自行修改正确后施工,向建设单位提出增加费用
【单选题】
某施工企业于2010年3月5日向发包人提交了竣工验收报告,比合同约定工期提前l周,但发包人以质量存在严重缺陷为由拒绝组织验收。双方经协商,于2010年3月20日提请有关部门进行质量鉴定,鉴定部门于2010年4月10日出具了工程质量合格的鉴定结论。则该工程的实际竣工日期应为___。
A. 2010年3月5日
B. 2010年3月12日
C. 2010年3月20日
D. 2010年4月10日
【单选题】
建设单位办理工程质量监督手续,无需提供的文件和资料是___。
A. 工程规划许可证
B. 设计单位资质等级证书
C. 工程勘察设计文件
D. 施工单位营业执照
【单选题】
根据《建设工程质量管理条例》规定,下列选项中___不属于建设单位的质量责任和义务。
A. 建设单位应当将工程发包给具有相应资质等级的承包单位
B. 建设工程发包单位不得迫使承包方以低于成本的价格竞标
C. 施工图设计文件未经审查批准的,建设单位不得使用
D. 建设工程实行质量保修制度,建设单位应履行保修义务
【单选题】
根据《建设工程质量管理条例》关于质量保修制度的规定,在设计文件规定的该工程的合理使用年限内均应由承包商负责保修的工程不包括___。
A. 基础设施工程
B. 重点工程
C. 房屋建筑的地基基础工程
D. 主体结构工程
【单选题】
建设单位应当在工程竣工验收合格后的___内到县级以上人民政府建设主管部门或其他有关部门备案。
A. 14天
B. 15天
C. 28小时
D. 一个月
【单选题】
建设单位有对不合格的建设工程按照合格工程验收行为的,责令改正,处工程合同价款___的罚款,造成损失的,依法承担赔偿责任。
A. 1%~3%
B. 2% ~ 4%
C. 3% ~ 5%
D. 4% ~ 6%
【单选题】
违反建设工程质量管理条例规定,注册建筑师、注册结构工程师、监理工程师等注册执业人员因过错造成重大质量事故的,___。
A. 责令停止执业1年
B. 终身不予注册
C. 追究刑事责任
D. 吊销执业资格证书,5年以内不予注册
【单选题】
《工程建设标准强制性条文》是___的配套文件。
A. 建设工程安全生产管理条例
B. 建筑法
C. 施工及验收标准
D. 建设工程质量管理条例
【单选题】
某施工企业于2010年4月5日向发包人提交了竣工验收报告,比合同约定工期提前了一周,但发包人以质量存在严重缺陷为由拒绝组织验收。双方经协商,于2009年4月20日提请有关部门进行质量鉴定,鉴定部门于2009年5月10日出具了工程质量合格的鉴定结论。则该工程的实际竣工日期应为___。
A. 2010年4月5日
B. 2010年4月12日C.2010年4月20日 D.2010年5月10曰
【单选题】
某扩建工程建设单位因急于参加认证,于11月15日未经检验而使用该工程,11月20日承包人提交了竣工验收报告,11月30日建设单位组织验收,12月3日工程竣工验收合格,则该工程竣工日期为___
A. 11月15日
B. 11月20日
C. 11月30日
D. 12月3日
推荐试题
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用