【单选题】
正步走向前摆臂时，肘部弯曲，小臂略成水平，离身体约___厘米。
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
正步走向后摆臂时左手心向右，右手心向左，手腕前侧距裤缝线约___厘米。
【单选题】
跑步走时，同时左脚利用右脚掌的蹬力跃出约___厘米。
【单选题】
跑步走时，小臂略平，稍向里合，两拳内侧各距衣扣线约___厘米。
【单选题】
踏步时，两脚在原地上下起落，抬起时，脚尖自然下垂，离地面约___厘米。
【单选题】
礼步走时，两脚按照脚跟、脚掌顺序缓慢着地，步幅约___厘米。
【单选题】
方向变换，是改变队列面对的方向的一种___？
A. 方向动作
B. 队列
C. 队列动作
D. 改变方向
【单选题】
方向变换的停止间，通常是左（右）转弯或者左（右）后转弯，必要时可以___？
A. 不转
B. 向左转
C. 向后转
D. 向右转
【单选题】
左（右）转弯，齐（跑）步——走，或者左（右）后转弯，齐（跑）步——走是___？
A. 口令
B. 前进口令
C. 动作口令
D. 停止间口令
【单选题】
向后——转，齐（跑）步——走（当需要向后转走时，应当先下___的口令，待方向变换后，再下“齐步——走”或者“跑步——走”的口令）？
A. 向右——转
B. 向后——转
C. 向左——转
D. 向后——走
【单选题】
一列横队方向变换时，轴具人员___，并逐渐向左（右）转动？
【单选题】
一列横队方向变换时，外翼第一名人员用大步行进并同___人员动作协调？
【单选题】
一列横队方向变换时，逐步变换方向（愈接近轴翼者，其步幅愈小）,其他人员用眼睛的余光向___，并保持规定的间隔和排面整齐？
A. 排头看齐
B. 外翼取齐
C. 左边取齐
D. 右边取齐
【单选题】
一列横队方向变换时，转到90度或者180度时踏步并取齐，听口令前___？
A. 前进
B. 向后转
C. 向左或者向右转
D. 前进或者停止
【单选题】
数列横队和并列纵队方向变换时，第一列轴翼人员停止间用___、行进间用小步？
【单选题】
数列横队和并列纵队方向变换时，外翼人员用___，保持排面整齐，边行进边变换方向？
A. 齐步行进
B. 跑步行进
C. 大步行进
D. 立定
【单选题】
数列横队和并列纵队方向变换时，转到___后，听口令前进或者停止？
A. 90度或者360度
B. 90度或者180度
C. 70度或者90度
D. 90度
【单选题】
纵队方向变换的停止间，通常是___，必要时可以向后转？
A. 左后转弯，或者左（右）后转弯
B. 右后转弯，或者左（右）后转弯
C. 左（右）转弯，或者左（右）后转弯
D. 左后转弯
【单选题】
一路纵队方向变换，___在左（右）转弯时，按照单个人员行进间转法（停止间，左转弯走时，左脚先向前1步）的要领实施？
A. 全体
B. 排尾
C. 排头
D. 基准人员
【单选题】
纵队方向变换在左（右）后转弯时，用小步边行进边___，转到90度或者180度后，照直前进；其他人员逐次进到基准人员的转弯处，转向新方向跟进？
A. 改变方向
B. 变换方向
C. 控制距离
D. 控制方向
【单选题】
数路纵队方向变换时，按照数列横队和并列纵队方向变换的___实施？
A. 动作要领
B. 方法
C. 动作
D. 要领
【单选题】
停止间敬礼要领：当领导进到距本单位适当距离时，指挥员下达“立正”的口令，跑步到领导前___处敬礼，待领导还礼后礼毕，再向领导报告？
A. 1-2步
B. 3-4步
C. 5-7步
D. 4-6步
【单选题】
行进间敬礼要领：由带队指挥员按照单个人员行进间敬礼的规定实施，队列人员按照___？
A. 跑步行进
B. 齐步行进
C. 原步法行进
D. 立定
【单选题】
队列内指挥员___的变换方法：横队、并列纵队时，政治指导员、副政治指导员左跨1步；政治教导员左跨1步（编有副政治教导员时，副大队长右跨1步，副政治教导员向前1步）;副支队长右跨1步，政治部主任向前1步？
A. 列队位置
B. 列队方向
C. 列队后
D. 位置
【单选题】
队列内指挥员列队位置的变换方法：纵队时，副中队（站）长向前1步，中队（站）长助理向左前1步；副大队长向左前1步（编有副政治教导员时，副大队长向前1步，副政治教导员左跨半步）;副支队长向前1步，政治部主任___？
A. 向前1步
B. 左跨半步
C. 向前半步
D. 右跨半步
【单选题】
向后——转，齐（跑）步——走（当需要向后转走时，应当先下___的口令，待方向变换后，再下“齐步——走”或者“跑步——走”的口令）？
A. 向右——转
B. 向左——转
C. 向后——走
D. 向后——转
【单选题】
数列横队和并列纵队方向变换时，第一列轴翼人员停止间用___、行进间用小步？
【单选题】
纵队方向变换在左（右）后转弯时，用小步边行进边___，转到90度或者180度后，照直前进；其他人员逐次进到基准人员的转弯处，转向新方向跟进？
A. 改变方向
B. 控制距离
C. 变换方向
D. 控制方向
【单选题】
院门处设置___，对出入的人员、车辆必须问明事由、查验证件、登记核实后放行？
A. 关卡
B. 门岗警卫人员
C. 消防员
D. 警卫
【单选题】
门岗警卫人员执勤时对于妨碍执勤的行为，应当予以___？
A. 制止
B. 放行
C. 控制
D. 不让出入
【单选题】
查验证件要领：来人距哨位___时，警卫人员右（左）臂抬起，五指并拢，掌心向前，面对来人提示：“请留步”？
A. 2-4步
B. 4-7步
C. 7-10步
D. 5-7步
【单选题】
查验证件要领：来人距哨位5-7步时，警卫人员右（左）臂抬起，五指并拢，掌心向前，面对来人提示：“请留步”；尔后向来人敬礼：“请出示证件”，警卫人员伸手自然接证，___将证件还给来人？
A. 验证后
B. 检查后
C. 登记后
D. 看后
【单选题】
交接班时，接班警卫人员距离交班警卫人员___？
A. 5-7步
B. 2-3步
C. 3-6步
D. 1-2步
【单选题】
交接班时，两人相互敬礼，相向面对面站立，___？
A. 协同观察周围情况
B. 熟悉周围情况
C. 接岗人员观察周围情况
D. 了解周围情况
【单选题】
交接班时，由交班警卫人员通报人员车辆出入、___、领导交办事项等值班情况；由接班警卫人员检查出入营门登记记录，警用器材设施完好等情况，确认无误后，进入岗位？
A. 登记记录情况
B. 岗亭卫生情况
C. 队容风纪检查
D. 个人穿着
【单选题】
交接班期间，应当___，限制人员和车辆通行？
A. 警戒
B. 观察四周
C. 保持警戒状态
D. 保持警惕
【单选题】
听到“向国旗——敬礼——”的口令后，在场人员行（ ），注视国旗上升至旗杆顶。___
【单选题】
举行誓师大会仪式时，可以视情邀请地方领导、消防救援人员（ ）参加、致辞。___
【单选题】
集体宣誓时，由预先指定的一名宣誓人在队前逐句领读誓词，其他人高声复诵，誓词内容由支队及以上单位根据（ ）、环境、人员等确定。___
【单选题】
凯旋仪式通常在单位驻地的（ ）、机场、码头等场所举行。___
【单选题】
（ ）是队列生活的重要内容，是消防救援队伍正规化的重要体现。___
推荐试题
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.
【单选题】
What is a benefit of using Enhanced vMotion Compatibility for an environment? ___
A. EVC masks CPU features to allow compatibility between hosts that are dissimilar.
B. EVC allows for cross platform vMotion to occur.
C. EVC enables Long
D. istance vMotion.
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
How many Link Aggregation Groups (LAGs) can be configured on a vSphere 6.x Distributed Switch? ___
A. 64
B. 96
C. 128
D. 256
【单选题】
An administrator needs to verify that vMotion operations can be performed in a vSphere data center.What round trip time (RTT) latency is the maximum value that will allow vMotion operations to succeed? ___
A. 50ms RTT
B. 100ms RTT
C. 150ms RTT
D. 200ms RTT
【单选题】
A storage administrator has reported that full utilization of all bandwidth from an ESXi 6.x host is not being seen. In troubleshooting the issue, the Adapter details are shown in the Exhibit. Based on the exhibit, what is cause of the issue? ___
A. The array is not setup to use the correct multipathing policy.
B. There are no virtual machines on the ESXi host.
C. Not all links are used because a path is disabled.
D. Another path needs to be configured.
【单选题】
An administrator is migrating a powered-on virtual machine, as shown in the exhibit. Which option should be selected to perform a Storage vMotion of the VM? ___
A. Change storage only
B. Change VM compute resource only
C. Change both compute resource and storage, changing the compute resource first.
D. Change both compute resource and storage, changing the storage resource first.
【单选题】
An administrator is attempting to enable Storage I/O Control on a datastore, but it is failing. What is the likely reason for this failure? ___
A. The host is connected to a datastore is running on ESX 4.0.
B. The host is connected to a Fibre Channel storage array.
C. The datastore has multiple extents.
D. The datastore is managed by a single vCenter Server.
