【填空题】
34.人类战争在经过 ___ 、___、___ 、___几个阶段后,正在进入信息化战争阶段。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【填空题】
35.六维空间是指___、___ 、___ 、___ 、___ 、___。
【填空题】
36. 中国人民解放军六个兵种分别是___、___、___、___、___、___。
【填空题】
37.中国人民解放军五大战区分别是___、___、___、___、___。.
【填空题】
38.世界新军事变革不断深化,打赢 ___ 战争成为各国关注的焦点
【填空题】
39.每年九月的___星期六为“全民国防教育日”。
【填空题】
40.制导技术按照不同控制导引方式可概括为 ___ 、 ___ 、 ___ 、 ___ 和___等五种方式。
【填空题】
41.凭借着___与 ___ 提供的“千里眼”、“顺风耳”,军事指挥员可以迅速、准确、全面地掌握敌方的情况,识别、跟踪和预测敌方未来的行动,从而为克敌制胜创造有利条件。
【填空题】
42.八国联军于___年,发动了侵华战争。
【填空题】
43.1957年10月4日,苏联把世界上第一颗 ___ 送入地球近地轨道.
【填空题】
44.中央军委下属机关有___个部<厅>、___个委员会、___个直属机构。
【填空题】
46.天基武器系统主要指攻击对方航天器用的卫星和卫星平台,包括 ___ 、 ___和___ 等。
【填空题】
47.中国人民解放军海军成立于___年。
【填空题】
48.新概念武器主要有 ___ 、___、 ___ 、 ___ 、___ 等。
【填空题】
49.核武器具有____、冲击波、____ ___、核电磁脉冲和放射性沾染等五种杀伤破坏因素。
【填空题】
50.精确制导技术是指采用高技术直接命中概率超过___以上的武器。
【单选题】
What is an example of social engineering?___
A. gaining access to a computer by observing the user login credentials
B. gaining access to a build through an unguarded entrance
C. gaining access to a server by using a USB stick
D. gaining access to a server room by posing as local IT
【单选题】
Which type of Layer 2 attack enables the attacker to intercept traffic that is intended for one specific recipient?___
A. BPDU attack
B. DHCP starvation I LAB
C. MAC address spoofing
D. CAM table overflow
【单选题】
Which about nested policy maps in a zone-based firewall is true ?___
A. They are limited to two leve ls in a hierarchical policy
B. Parent policies are previously defined policies that are defined by using the service policy command
C. A child policy is a new policy that uses a pre-existing policy.
D. A child policy is a new that uses a pre-existing policy
【单选题】
In which configuration do you configure the ip ospf authentication key 1 command?___
A. routing process
B. interface
C. privileged
D. global
【单选题】
Which statement about command authorization and security contexts is true?___
A. If command authorization is configured, it must be enabled on all contexts.
B. The change to command invokes a new context session with the credentials of the currently
C. AAA settings are applied on a per-context basis
D. The enable. 15 user ang admins with chang to permission ha e dfferent command authorization levels pertontext
【单选题】
Which command do you enter to enable authentication for OSPF on an interface?___
A. router(config-if)#ip ospf message-digest-key 1 md5 CIS COPASS
B. router(config-if)#ip ospf authentication message-digest
C. router(config-if)#ip ospf authentication-key CISCOPASS
D. router(config-if)#area 0 authentication message-digest
【单选题】
What feature defines a campus area network?___
A. It has a single geographic location
B. It lacks external connectivity.
C. It has a limited number of segments.
D. It has limited or restricted Internet access
【单选题】
Which type of attack most commonly involves a direct attack on a network?___
A. :phishing
B. Trojan horse
C. denial of service
D. social engineering
【单选题】
What information does the key length provide in an encryption algorithm?___
A. the cipher block size
B. the hash bloc k size
C. the number of permutations
D. the packet size
【单选题】
How do you verify TaCACS+ connectivity to a device?___
A. You successfully log in to the device by using the local credentials
B. You connect via console port and receive the login prompt.
C. You connect to the device using SSH and receive the login prompt.
D. You successfully log in to the device by using ACS credentials
【单选题】
Which term best describes the concept of preventing the modification of data in transit and in storage?___
A. availability
B. confidentially
C. fidelity
D. integrity
【单选题】
Which loS command is used to define the authentication key for ntp?___
A. switch(config )#ntp authentication-key 1 mds Clcs
B. switch(config )#ntp authenticate
C. switch(config)#ntp trusted-key 1
D. switch(config)#ntp source 192.168.0.1
【单选题】
What is true about the cisco lOS Resilient Configuration feature ?___
A. The feature can be disabled through a remote session
B. There is additional space required to secure the primary cisco lOS image file.
C. The feature automatically detects image or configuration version mismatch.
D. Remote storage is used for securing files
【单选题】
When is the default deny all policy an exception in zone-based firewalls?___
A. when traffic terminates on the router via the self zone
B. when traffic traverses two interfaces in different zones
C. when traffic traverses two interfaces in the same zone
D. when traffic sources from the router via the self zone
【单选题】
.If an access port is assigned as an isolated port in a PVLAN, which network ports can it communicate with?___
A. promiscuous ports in the same PLVAN
B. isolated ports in the same PVLAN
C. all ports in the same PAVLAN at ILAR
D. all ports in the adjacent PVLAN
【单选题】
Which IPSEC mode is used to encypt traffic directly between a client and a server VPN endpoint?___
A. quick mode
B. transport mode
C. aggressive mode
D. tunnel mode
【单选题】
Which command do you enter to verify that a vpn connection is established between two endpoints and that the connection is passing traffic? ___
A. Firewall#sh crypto session
B. Firewall#debug crypto isakmp
C. Firewall#tsh crypto ipsec sa
D. Firewall#sh crypto isakmp sa
【单选题】
which type of Pvlan port allows communication from all port types?___
A. isolated
B. in -line
C. community
D. promiscuous
【单选题】
Which command do you enter to configure your firewall to conceal internal addresses?___
A. no ip directed-broadcast
B. no ip logging facility
C. no proxy-arp
D. no ip inspect audit-trial
E. no ip inspect
F. route
【单选题】
Which feature defines a campus area network? ___
A. It has a limited number of segments.
B. It has limited or restricted Internet access
C. It lacks ex1ternal connectivity.
D. It has a single geographic location
【单选题】
What technology can you use to provide data confidentiality data integrity and data origin authentication on your network?___
A. IPSec
B. Certificate Authority
C. IKE
D. Data
E. ncryption Standards
【单选题】
which standard is a hybrid protocol that uses oakley and skerne ke y exchanges is an ISAKMP framework?___
【单选题】
What is the actual los privilege level of User Exec mode?___
【单选题】
What is the effect of the asa command crypto isakmp nat-traversal?___
A. It opens port 500 only on the out side interface
B. It opens port 500 only on the inside interface
C. It opens port 4500 on all interfaces that are IPSec enabled
D. It opens port 4500 only on the out side interfac
推荐试题
【单选题】
CRH2A动车组进行自动过分相装置检测划磁铁试验中强迫状态试验时:打开信号处理器电源,在1号车司机室插入主控钥匙,制动手柄置“快速”位,方向手柄置“前”位,输入‘Ⅰ端向前’信号,用试验磁铁快速、一次性划过的感应接收器为( )。___
A. T1和T2
B. T1和T3
C. T2和T4
D. T3和T
【单选题】
CRH2A(统型)动车组烟火报警系统探测器污染状态检查时当探测器阀值超过( )%时,表明探头污染,更换此探测器过滤棉并清洗探测器。___
A. 100
B. 110
C. 120
D. 130
【单选题】
CRH2A动车组内端门检测中对承载部件的导轨用( )进行润滑.___
A. 乐泰8104硅脂
B. 150#透平油
C. Molykote G-n润滑油
D. 道康宁557
【单选题】
CRH2A动车组转向架更换后落成检查,测定车体与车轮轮缘的上下间隔为( )mm以上。___
【单选题】
CRH2A动车组更换AG37速度传感器之前,在新传感器的连接器处对其阻值进行确认,针号1~2间电阻值为( )Ω(20℃时).___
A. 60±10
B. 33±4
C. 40±10
D. 27±3
【单选题】
下列对电动空气压缩机本体描述不正确的是( )。___
A. 本装置的结构时为用法兰盘拼合压缩机与电动机作为整体结构。
B. 且用内装的联轴节来传达动力。
C. 且用外装的联轴节来传达动力。
D. 弹簧力大小可以通过安装在调整阀下部的调整螺钉来调整。
【单选题】
CRH380A统型动车组中引用了车载信息装置和自诊断技术,该系统由两部分构成,它还有附属设施,不包括( )。___
A. 对讲机
B. 监控显示器及显示控制装置
C. 车内信息显示器
D. IC读卡器
【单选题】
CRH2A统型动车组一、二级检修作业中,接地继电器检查及清洁时,测量GR3的701B~700A间输入电压应为( )以下。___
A. AC4 V
B. AC5 V
C. AC6 V
D. AC7 V
【单选题】
CRH380A统型动车组温水箱检查测试时用( )兆欧表进行电源端子和非充电部之间的绝缘测试。___
A. 100V
B. 500V
C. 1000V
D. 1500V
【单选题】
CRH2A统型动车组采用空心车轴设计,它的中心通孔直径为( )。___
A. 50mm
B. 60mm
C. 70mm
D. 80mm
【单选题】
CRH2A统型动车组二级修,自动过分相装置检测作业时,使用万用表欧姆档分别测量其插孔1和2,3和4,6和7以及19和20之间的直流阻值,电阻值正常范围应在( )。___
A. 250~350Ω
B. 350~450Ω
C. 450~550Ω
D. 550~650Ω
【单选题】
CRH2A统型动车组二级修,自动过分相装置输出主断“断”“合”信号后,在( )内无法再接收信号,因此每项试验完成后,需等待( )或重新开机自检后,再进行下一项试验。___
A. 1min,1 min
B. 1 min,2 min
C. 2 min,2 min
D. 2 min,3 min
【单选题】
CRH2A统型动车组二级修,车内压力释放阀检查时,投入主控,制动手柄移动至“快速”位,确认总风压力在( )以上。___
A. 350KPa
B. 430KPa
C. 530KPa
D. 590KPa
【单选题】
CRH2A统型动车组,无外部电源供电时,回送时间不超过( )小时,超过时限速5 km/h。___
【单选题】
CRH2A统型动车组蓄电池单体的使用温度范围是( )之间无异常。___
A. -15℃~+45℃
B. -25℃~+45℃
C. -15℃~+55℃
D. -5℃~+45℃
【单选题】
CRH2A统型动车组,每台牵引电机的额定功率是( )___
A. 260kw
B. 300kw
C. 350kw
D. 400kw
【单选题】
CRH2A统型动车组转向架横梁主体采用钢管结构,内部作为( )的辅助空气室使用。___
【单选题】
CRH2A统型动车组CAmp1是( )的缩写。___
A. 司机台控制放大器
B. 联络装置
C. 配电盘控制放大器
D. 监控室控制放大器
【单选题】
( )是CRH2A统型动车组二系悬挂中的关键部件,是影响车辆运行平稳性的关键因素。___
A. 空气弹簧
B. 抗侧滚扭杆
C. 差压阀
D. 高度调整阀
【单选题】
CRH2A统型动车组转向架基础制动方式是( )___
A. 空气制动
B. 空液转换液压制动
C. 抱闸制动
D. 以上都不对
【单选题】
CRH2A统型动车组在速度低于( )时可实施耐雪制动。___
A. 70km/h
B. 100 km/h
C. 110km/h
D. 160km/h
【单选题】
CRH2A统型动车组二级修,今创侧门车门关闭到位后,关门到位开关碰柱上的红线露出开关体( )。___
A. 1~2mm
B. 1~3mm
C. 2~3mm
D. 2~3mm
【单选题】
CRH2A统型动车组二级修,自动车钩高度测量,测量头车车钩中心线到轨面高度,高度范围应为985-1010mm,车钩钩头左右偏转角度不大于( )。___
【单选题】
CRH2A统型动车组二级修,二级修轮径差的限度为:同一转向架≤( )mm,同一车厢≤( )mm,相邻车厢间≤( )mm,同一轮对≤( )mm。___
A. 1、4、10、40
B. 4、10、1、40
C. 40、4、10、1
D. 4、4、40、1
【单选题】
CRH2A统型动车组,受电弓专项检查时,两个滑板高度差大于( )须更换。___
A. 1mm
B. 2mm
C. 2.5mm
D. 3mm
【单选题】
CRH2A统型动车组二级修,动车组辅助空压机手动启动正确方式为( )。___
A. 用铁棒按下辅助空压机接触器触点
B. 用绝缘工装按下辅助空压机接触器触点
C. 用手按下辅助空压机接触器触点
D. 用对讲机天线按下辅助空压机接触器触点
【单选题】
CRH2A统型动车组二级修,在紧急制动缓解状态,下列哪些操作在主控端不会产生紧急制动 ( )。___
A.
B. V手柄拔取 B. MR旋塞关闭
C. 电气连接切换器在合并位
D. 按下客室端部红色紧急按钮
【单选题】
CRH380A统型动车组受电弓碳滑板支撑接触面涂导电接触脂,螺纹连接处涂专用螺纹润滑脂,M8螺母力矩 ( ) ,Pu管紧固( )。___
A. 10N/m <3N/m
B. 10N/m <5N/m
C. 15N/m <3N/m
D. 20N/m <3N/m
【单选题】
CRH2A统型动车组二级修,今创侧门运动间隙检查:开关门过程中,上滑轮及携门架不与周围车体发生干涉、刮碰,携门架在上滑轮上的安装螺栓与复位弹簧座之间的间隙不小于( ),下侧螺栓头与车体的间隙不小于( )。___
A. 2mm.3mm
B. 3mm.4 mm
C. 3mm.5mm
D. 5mm.6mm
【单选题】
CRH2A统型动车组二级修检查侧拉门门板下沿密封胶条压板的安装状态良好;门板下沿与排水槽之间的间隙不小于( )mm。___
A. 2mm
B. 3mm
C. 5mm
D. 4mm
【单选题】
CRH380A型动车组二级修客室侧门障碍返回功能检测准备好用( )检测块进行试验。___
A. 30 mm x 60 mm
B. 30mm x50
C. 50mm x50mm
D. 40mm x50
【单选题】
CRH380A型动车组内端门电机或控制器更换后且远程设定完后开门时间约为( )秒,关门时间约为( )秒。___
A. 2.5-3.5 3.5-4.5
B. 1.5-2.5 3.5-4.5
C. 2.5-3.5 2.5-4.5
D. 1.5-4.5 2.5-4.5
【单选题】
CRH2A统型动车组( )号车车体侧面装有连接外部电源的插座(AC400V、单相、50Hz)?___
【多选题】
CRH2型动车组空调装置控制部分由( )组成。 ___
A. 逆变器
B. 冷凝器
C. 直流电抗器
D. 接触器盘1
E. 接触器盘2
【多选题】
以下哪些部件属于CRH2型动车组牵引变流器组成结构?( )。 ___
A. 整流器
B. 逆变器
C. 无触点控制装置
D. 交流接触器
E. 控制电源
F. 直流平滑电路
【多选题】
CRH2型动车组车辆信息控制系统的数据记录功能包括( )。 ___
A. 故障时设备动作信息的记录
B. 主故障发生时的状态记录
C. 车辆性能信息的收集
D. 行驶距离及牵引、再生电力的累计
E. 车辆项目选择信息的收集
F. 车辆空调运转率及运行状态信息的收集
【多选题】
CRH2型动车组在按压【VCB合】按钮或过分相后,单车VCB不能闭合的原因有( ) ___
A. VCB被远程切除
B. 该单元牵引变流器内主接触器K处于闭合位。
C. 发生一次侧过电流、三次侧接地、三次侧过电流等故障,故障排除后未进行RS复位
D. 总风源给VCB气路阀门被关闭
【多选题】
CRH2A型动车组辅助电源装置的故障保护功能有( )。 ___
A. 输入过电流;变流器过压
B. 变流器过流;变流器过载
C. 输出过压;输出低电压
D. 检测接地;输出短路
【多选题】
CRH380A统型动车组齿轮箱检查的内容有哪些( )。 ___
A. 齿轮箱无漏油、无破损、安装状态良好,各安装螺栓无松动,防松标记清晰无错位,防松铁丝无断裂。
B. 油位观察窗清晰,污浊时用布沾清水清洁(油位观察窗不得使用有机溶剂或稀释剂清理,以避免观察窗产生裂纹,清理时可用干净的布蘸清水或中性清洗剂擦拭),齿轮箱油量位于应在中刻度与上刻度之间,润滑油无变色、混浊现象。(注:在空车且停车状态20min后,确认油量)
C. 齿轮箱温度传感器、呼吸器、注油孔盖、排油堵配件安装紧固,无破损;温度传感器及引线无损伤。
D. 接地装置和碳刷外观及安装状态良好,接地线无松动,防松标记清晰无错位;碳刷在观察窗两红色刻度线之间。
E. 齿轮箱支架(吊杆)装置外观无异常, 螺栓无松动,齿轮箱支架(吊杆)橡胶元件安装状态良好无裂纹,无老化、溶胶、脱胶等现象,安装螺栓紧固,开口销无丢失、开口到位,裂纹长度≤20mm且深度≤5mm。飞石防护挡和安全托架安装紧固,安装螺栓防松标记清晰无错位。齿轮箱安全防护挡圆销安装螺栓无松动,开口销无丢失。
F. 检查齿轮箱温度试纸。对不清晰的温度试纸进行檫试,检查温度试纸齐全、显示清晰、无跳格显示,无鼓泡、受潮,试纸显示温度正常(确认齿轮箱轴承座温度不超过100℃,箱壁温度不超过90℃),显示异常的,需更换试纸,并跟踪。
【多选题】
CRH380A统型动车组APU组成包括( )。 ___
A. 输入变压器
B. 辅助变压器
C. 变频器
D. 逆变器