【单选题】
凡装有攀登装置的杆、塔，攀登装置上应设置( )标示牌。
A. “止步，高压危险！”
B. “禁止攀登，高压危险！”
C. “从此上下！”
D. “有电危险！”
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
装设于( )的配电变压器应设有安全围栏，并悬挂“止步，高压危险！”等标示牌。
【单选题】
装设于地面的配电变压器应设有安全围栏，并悬挂( )等标示牌。
A. “止步，高压危险！”
B. “禁止攀登，高压危险！”
C. “从此上下！”
D. “有电危险！”
【单选题】
检修作业，若需将栏杆拆除时，应装设( )，并在检修作业结束时立即将栏杆装回。
A. 临时遮栏
B. 固定遮栏
C. 安全警示牌
D. 安全警示灯
【单选题】
检修作业临时遮栏应由上、下两道横杆及栏杆柱组成。上杆离地高度为( )，下杆离地高度为500～600mm，并在栏杆下边设置严密固定的高度不低于180mm的挡脚板。
A. 1000～1200mm
B. 1050～1200mm
C. 1000～1250mm
D. 1050～1250mm
【单选题】
现场勘察工作，对涉及( )的作业项目，应由项目主管部门、单位组织相关人员共同参与。
A. 多专业、多部门
B. 多部门、多单位
C. 多专业、多单位
D. 多专业、多部门、多单位
【单选题】
开工前，工作负责人或工作票签发人应重新核对现场勘察情况，发现与原勘察情况有变化时，应及时修正、完善相应的( )。
A. 施工方案
B. 组织措施
C. 技术措施
D. 安全措施
【单选题】
配电工作，需要将高压线路、设备停电或做安全措施者，应填用( )。
A. 配电线路第一种工作票
B. 配电线路第二种工作票
C. 配电第一种工作票
D. 配电第二种工作票
【单选题】
10kV及以下高压线路、设备不停电时的安全距离为( )。
A. 0.35m
B. 0.6m
C. 0.7m
D. 1.0m
【单选题】
非连续进行的故障修复工作，应使用( )。
A. 故障紧急抢修单
B. 工作票
C. 施工作业票
D. 故障应急抢修单
【单选题】
工作票票面上若有个别( )需要修改、补充时，应使用规范的符号，字迹应清楚。
A. 错字
B. 漏字
C. 错、漏字
D. 工作任务
【单选题】
由工作班组现场操作时，若不填用操作票，应将设备的双重名称，( )及操作内容等按操作顺序填写在工作票上。
A. 设备名称和编号
B. 线路的名称、杆号、位置
C. 双重称号
D. 设备名称
【单选题】
配电工作票由设备运维管理单位签发，也可由经设备运维管理单位审核合格且经批准的( )签发。
A. 修试及基建单位
B. 修试（施工）单位
C. 检修及基建单位
D. 检修（施工）单位
【单选题】
供电单位或施工单位到用户工程或设备上检修(施工)时，工作票应由有权签发的( )签发。
A. 供电单位
B. 用户单位、施工单位或供电单位
C. 用户单位或供电单位
D. 施工单位或用户单位
【单选题】
同一电压等级、同类型、相同安全措施且依次进行的( )上的不停电工作，可使用一张配电第二种工作票。
A. 不同配电线路或不同工作地点
B. 不同配电线路
C. 不同工作地点
D. 相邻配电线路
【单选题】
配电带电作业工作票，对( )且依次进行的数条线路上的带电作业，可使用一张配电带电作业工作票。
A. 同一电压等级
B. 同一电压等级、同类型
C. 同一电压等级、相同安全措施
D. 同一电压等级、同类型、相同安全措施
【单选题】
工作许可时，工作票一份由工作负责人收执，其余留存于( )处。
A. 工作票签发人或专责监护人
B. 工作票签发人或工作许可人
C. 工作许可人或用户负责人
D. 工作许可人或专责监护人
【单选题】
工作期间，工作票应始终保留在( )手中。
A. 工作票签发人
B. 工作负责人
C. 工作许可人
D. 专责监护人
【单选题】
若一张工作票下设多个小组工作，工作负责人应指定每个小组的小组负责人(监护人)，并使用( )。
A. 工作任务单
B. 安全措施票
C. 派工单
D. 工作任务卡
【单选题】
若一张工作票下设多个小组工作，( )应指定每个小组的小组负责人(监护人)，并使用工作任务单(见附录G)。
A. 工作票签发人
B. 工作许可人
C. 工作负责人
D. 专责监护人
【单选题】
工作任务单一式两份，由工作票签发人或工作负责人签发，一份由( )留存，一份交小组负责人。
A. 工作许可人
B. 工作负责人
C. 工作票签发人
D. 专责监护人
【单选题】
工作任务单由( )许可，一份由工作负责人留存，一份交小组负责人。
A. 值班调控人员
B. 工作许可人
C. 工作负责人
D. 运维负责人
【单选题】
工作结束后，由小组负责人向( )办理工作结束手续。
A. 工作票签发人
B. 工作负责人
C. 工作许可人
D. 值班调控人员
【单选题】
一回线路检修(施工)，邻近或交叉的其他电力线路需配合停电和接地时，应在工作票中列入( )。
A. 安全措施
B. 相应的安全措施
C. 技术措施
D. 相应的技术措施
【单选题】
一回线路检修(施工)，若配合停电线路属于其他单位，应由( )单位事先书面申请，经配合停电线路的运维管理单位同意并实施停电、验电、接地。
A. 运维
B. 施工
C. 检修
D. 检修（施工）
【单选题】
需要进入变电站或发电厂升压站进行架空线路、电缆等工作时，应增填工作票份数(按许可单位确定数量)，分别经( )许可，并留存。
A. 变电站或发电厂等设备运维管理单位的工作许可人
B. 调度
C. 设备运维管理单位负责人
D. 变电站或发电厂负责人
【单选题】
检修(施工)单位的工作票签发人和工作负责人名单应事先送( )备案。
A. 调度控制中心
B. 安全监督部门
C. 设备运维管理单位
D. 工区（车间）
【单选题】
若需变更或增设( )，应填用新的工作票，并重新履行签发、许可手续。
A. 安全条件
B. 施工范围
C. 工作任务
D. 安全措施
【单选题】
配电第一种工作票，应在工作( )送达设备运维管理单位(包括信息系统送达)。
A. 前两天
B. 前一天
C. 当天
D. 前一周
【单选题】
需要( )操作设备的配电带电作业工作票和需要办理工作许可手续的配电第二种工作票，应在工作前一天送达设备运维管理单位。
A. 带电作业人员
B. 运维人员
C. 监控人员
D. 值班调控人员
【单选题】
不需要办理许可手续的配电第二种工作票，由工作负责人向( )提出申请，得到同意后给予办理。
A. 值班调控人员
B. 工作票签发人
C. 工作许可人
D. 运维人员
【单选题】
( )不得延期。
A. 配电第一种工作票
B. 配电第二种工作票
C. 带电作业工作票
D. 低压工作票
【单选题】
工作负责人应由有本专业工作经验、熟悉工作范围内的设备情况、熟悉本规程，并经( )批准的人员担任。
A. 工区（车间）
B. 单位
C. 上级单位
D. 公司
【单选题】
专责监护人应由具有相关专业工作经验，熟悉工作范围内的( )情况和本规程的人员担任。
【单选题】
专责监护人的安全责任包含：明确被监护人员和( )。
A. 许可工作的命令正确
B. 工作必要性
C. 监护范围
D. 安全注意事项
【单选题】
填用配电第一种工作票的工作，应得到( )的许可，并由工作负责人确认工作票所列当前工作所需的安全措施全部完成后，方可下令开始工作。
A. 现场工作许可人
B. 配电运维人员
C. 全部工作许可人
D. 值班调控人员
【单选题】
所有许可手续(工作许可人姓名、许可方式、许可时间等)均应记录在( )上。
A. 工作票
B. 值班日志
C. 作业指导书
D. 记录簿
【单选题】
带电作业需要停用重合闸(含已处于停用状态的重合闸)，应向( )申请并履行工作许可手续。
A. 运行人员
B. 设备运维管理单位
C. 调控人员
D. 运行值班负责人
【单选题】
填用配电第二种工作票的配电线路工作，可不履行( )手续。
A. 工作票
B. 工作许可
C. 工作监护
D. 工作交接
【单选题】
填用配电( )工作票的配电线路工作，可不履行工作许可手续。
A. 第一种
B. 第二种
C. 低压
D. 带电作业
推荐试题
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑，调整方便，应用广泛
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1"，则其线值分度值可用0.05mm/m表示
【判断题】
所有的紫色酒精，在 1 米内不准点有明火，不准放在暖气片上
【判断题】
固定式装配适用于单件和小批量模具的装配，以及装配精度要求较高，需要调整的部位较多的装配
【判断题】
我国对企业发生的事故，坚持“四不放过”原则进行处理
【判断题】
在机械设备中，凸轮表面误差将会引起扭转振动
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
