【多选题】
根据个人所得税规定，税务机关确认纳税人的身份、金融账户信息时相关部门应当协助，具有协助义务的部门有___。
A. 公安
B. 商业银行
C. 人民银行
D. 金融监督管理
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【多选题】
纳税人应如实向扣缴义务人提供基础信息和专项扣除相关信息。税务机关发现纳税人提供虚假信息的，应当___。
A. 责令改正并通知扣缴义务人
B. 情节严重的，有关部门应当依法予以处理，纳入信用信息系统并实施联合惩戒
C. 责令纳税人限期改正，可以处2000元以下的罚款
D. 责令改正并通知扣缴义务人，可以处2000元以下的罚款
【单选题】
任何人发现有违反本规程的情况，应立即制止，经( )后方可恢复作业。 答案：D
A. 上级领导同意
B. 处罚
C. 批评教育
D. 纠正
【单选题】
( )有权拒绝违章指挥和强令冒险作业；在发现直接危及人身、电网和设备安全的紧急情况时，有权停止作业或者在采取可能的紧急措施后撤离作业场所，并立即报告。 答案：C
A. 工作人员
B. 管理人员
C. 作业人员
D. 任何人
【单选题】
在试验和推广新技术、新工艺、新设备、新材料的同时，应制定相应的( )，经本单位批准后执行。 答案：C
A. 组织措施
B. 技术措施
C. 安全措施
D. 应急措施
【单选题】
配电线路系指( )kV及以下配电网中的架空线路、电缆线路及其附属设备等。 答案：C
【单选题】
从事配电相关工作的( )应遵守并严格执行本规程。 答案：D
A. 运维人员
B. 检修人员
C. 施工人员
D. 所有人员
【单选题】
作业人员应经医师鉴定，无妨碍工作的病症，体格检查每( )至少一次。 答案：C
【单选题】
作业人员应具备必要的安全生产知识，学会紧急救护法，特别要学会( )。 答案：B
A. 创伤急救
B. 触电急救
C. 溺水急救
D. 灼伤急救
【单选题】
作业人员应接受相应的安全生产知识教育和岗位技能培训，掌握配电作业必备的电气知识和业务技能，并按工作性质，熟悉本规程的相关部分，经( )合格上岗。 答案：C
【单选题】
参与公司系统所承担电气工作的外单位或外来人员应熟悉本规程；经考试合格，并经( )认可后，方可参加工作。 答案：B
A. 工程管理单位
B. 设备运维管理单位
C. 公司领导
D. 安监部门
【单选题】
作业人员应被告知其作业现场和( )存在的危险因素、防范措施及事故紧急处理措施。答案：C
A. 办公地点
B. 生产现场
C. 工作岗位
D. 检修地点
【单选题】
进入作业现场应正确佩戴安全帽，现场作业人员还应穿( )、绝缘鞋。 答案：D
A. 绝缘服
B. 屏蔽服
C. 防静电服
D. 全棉长袖工作服
【单选题】
作业人员对本规程应每年考试一次。因故间断电气工作连续( )及以上者，应重新学习本规程，并经考试合格后，方可恢复工作。 答案：C
A. 一个月
B. 两个月
C. 三个月
D. 六个月
【单选题】
作业人员对本规程应( )考试一次。因故间断电气工作连续三个月及以上者，应重新学习本规程，并经考试合格后，方可恢复工作。 答案：C
A. 每月
B. 每半年
C. 每年
D. 每两年
【单选题】
新参加电气工作的人员、实习人员和临时参加劳动的人员(管理人员、非全日制用工等)，应经过( )后，方可下现场参加指定的工作，并且不得单独工作。 答案：B
A. 专业技能培训
B. 安全生产知识教育
C. 考试合格
D. 电气知识培训
【单选题】
在多电源和有自备电源的用户线路的( )处，应有明显断开点。 答案：C
A. 低压系统接入点
B. 分布式电源接入点
C. 高压系统接入点
D. 产权分界点
【单选题】
在多电源和有自备电源的用户线路的高压系统接入点，应有明显( )。 答案：D
A. 电气指示
B. 机械指示
C. 警示标识
D. 断开点
【单选题】
在绝缘导线所有电源侧及适当位置(如支接点、耐张杆处等)、柱上变压器高压引线，应装设( )或其他验电、接地装置。 答案：D
A. 验电环
B. 接地环
C. 带电显示器
D. 验电接地环
【单选题】
封闭式高压配电设备( )应装设带电显示装置。 答案：C
A. 进线电源侧
B. 出线线路侧
C. 进线电源侧和出线线路侧
D. 进线侧
【单选题】
柱上断路器应有分、合位置的( )指示。 答案：A
【单选题】
封闭式组合电器引出电缆备用孔或母线的终端备用孔应用( )封闭。 答案：C
A. 绝缘挡板
B. 防火泥
C. 专用器具
D. 遮栏
【单选题】
待用间隔(已接上母线的备用间隔)应有( )，并纳入调度控制中心管辖范围。其隔离开关(刀闸)操作手柄、网门应能加锁。 答案：C
A. 名称
B. 编号
C. 名称、编号
D. 名称、编号、电压等级
【单选题】
高压手车开关拉出后，( )应可靠封闭。 答案：D
A. 绝缘挡板
B. 柜门
C. 箱盖
D. 隔离挡板
【单选题】
作业现场的( )和安全设施等应符合有关标准、规范的要求，作业人员的劳动防护用品应合格、齐备。 答案：C
A. 安全装置
B. 环境卫生
C. 生产条件
D. 技术措施
【单选题】
作业现场的生产条件和安全设施等应符合有关标准、规范的要求，作业人员的( )应合格、齐备。 答案：A
A. 劳动防护用品
B. 工作服
C. 安全工器具
D. 施工机具
【单选题】
经常有人工作的场所及施工车辆上宜配备急救箱，存放( )，并应指定专人经常检查、补充或更换。 答案：D
A. 防蚊虫药品
B. 医用绷带
C. 创可贴
D. 急救用品
【单选题】
地下配电站过道和楼梯处，应设( )和应急照明等。 答案：B
A. 防踏空线
B. 逃生指示
C. 防绊跤线
D. 挡鼠板
【单选题】
装有SF6设备的配电站，应装设强力通风装置，风口应设置在( )，其电源开关应装设在门外。 答案：C
A. 室内中部
B. 室内顶部
C. 室内底部
D. 室内电缆通道
【单选题】
配电站、开闭所户内高压配电设备的裸露导电部分对地高度小于( )时，该裸露部分底部和两侧应装设护网。 答案：B
A. 2.8m
B. 2.5m
C. 2.6m
D. 2.7m
【单选题】
配电站、开闭所户外10kV高压配电线路、设备所在场所的行车通道上，车辆(包括装载物)外廓至无遮栏带电部分之间的安全距离为( )。 答案：B
A. 0.7m
B. 0.95m
C. 1.05m
D. 1.15m
【单选题】
配电站、开闭所户外20kV高压配电线路、设备所在场所的行车通道上，车辆(包括装载物)外廓至无遮栏带电部分之间的安全距离为( )。 答案：C
A. 0.7m
B. 0.95m
C. 1.05m
D. 1.15m
【单选题】
凡装有攀登装置的杆、塔，攀登装置上应设置( )标示牌。 答案：B
A. “止步，高压危险！”
B. “禁止攀登，高压危险！”
C. “从此上下！”
D. “有电危险！”
【单选题】
装设于( )的配电变压器应设有安全围栏，并悬挂“止步，高压危险！”等标示牌。 答案：D
【单选题】
装设于地面的配电变压器应设有安全围栏，并悬挂( )等标示牌。 答案：A
A. “止步，高压危险！”
B. “禁止攀登，高压危险！”
C. “从此上下！”
D. “有电危险！”
【单选题】
检修作业，若需将栏杆拆除时，应装设( )，并在检修作业结束时立即将栏杆装回。 答案：A
A. 临时遮栏
B. 固定遮栏
C. 安全警示牌
D. 安全警示灯
【单选题】
检修作业临时遮栏应由上、下两道横杆及栏杆柱组成。上杆离地高度为( )，下杆离地高度为500～600mm，并在栏杆下边设置严密固定的高度不低于180mm的挡脚板。 答案：B
A. 1000～1200mm
B. 1050～1200mm
C. 1000～1250mm
D. 1050～1250mm
【单选题】
现场勘察工作，对涉及( )的作业项目，应由项目主管部门、单位组织相关人员共同参与。 答案：D
A. 多专业、多部门
B. 多部门、多单位
C. 多专业、多单位
D. 多专业、多部门、多单位
【单选题】
开工前，工作负责人或工作票签发人应重新核对现场勘察情况，发现与原勘察情况有变化时，应及时修正、完善相应的( )。 答案：D
A. 施工方案
B. 组织措施
C. 技术措施
D. 安全措施
【单选题】
配电工作，需要将高压线路、设备停电或做安全措施者，应填用( )。 答案：C
A. 配电线路第一种工作票
B. 配电线路第二种工作票
C. 配电第一种工作票
D. 配电第二种工作票
【单选题】
10kV及以下高压线路、设备不停电时的安全距离为( )。 答案：C
A. 0.35m
B. 0.6m
C. 0.7m
D. 1.0m
推荐试题
【多选题】
What are two ways to identify TCP/IP stack information? (Choose two.)___
A. Using the vSphere Web Client
B. Using esxcli network ip netstack
C. Using esxcfg-netstack
D. Using the vSphere Client
【多选题】
Which two actions are required when enabling vFlash Read Cache for a virtual machine's virtual disk? (Choose two.)___
A. A value in the Virtual Flash Read Cache text box must be entered.
B. A Flash Resource Pool for Cache size reservation must be entered.
C. The Device backing and the block size must be configured.
D. The
E. nable virtual flash host swap cache check box must be selected.
【多选题】
What two IT infrastructure components are virtualized by vSphere Essentials? (Choose two.)___
A. Networks
B. Applications
C. Storage
D. Management
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
【多选题】
VMware tools is failing to install on a Microsoft Windows virtual machine. What are two possible situations that would prevent the installation? (Choose two.)___
A. The VMware tools installation media is corrupt.
B. The incorrect Operating System was selected in the virtual machine options.
C. The software prerequisites have not been installed.
D. The prerequisite services have not been started.
【多选题】
As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)___
A. Schedule a Replication Task on the primary instance
B. Select the first instance during the installation of subsequent instances
C. During the installation of each instance choose Linked-Mode
D. Enable Synchronize to Active Directory on each instance
【多选题】
You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?___
A. Create an Object Inside the vApp.
B. Add an Object to a vApp.
C. Add an Object to the
D. atastore the vApp is located in.
【多选题】
Which three steps must be taken to use vSphere Update Manager 6.x to upgrade an ESXi 5.5 host to vSphere 6.x? (Choose three.)___
A. Download an ESXi Image.
B. Configure the vSphere Update Manager Download Service.
C. Create a baseline and attach it to the ESXi Host.
D. Scan the vCenter Content Library for the
E. SXi Image.
【多选题】
Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)___
A. Use the Virtual Machine Remote Console (VMRC).
B. Use Remote Desktop Protocol (RDP) to connect.
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server.
D. Ask the vSphere administrator to grant permission to access with the Horizon View Direct Connect Client.
【多选题】
Which three are architecture components of vRealize Operations? (Choose three.)___
A. Identity Server
B. Administrative Server
C. Analytics Server
D. Database Server
E. Connection Broker
