【单选题】
使不同见解的人统一思想，减少争论内耗，提高效率的方法是 ___
A. 亲和图；
B. 因果图；
C. 排列图；
D. 关联图
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
因其形状很像因果，是一种发现问题“根本原因”的方法，是一种透过现象看本质的分析方法是 ___
A. 亲和图；
B. 鱼骨图；
C. 排列图；
D. 关联图
【单选题】
就是把关系复杂而相互纠缠的问题及其因素,用箭头连接起來的一种图示分析工具，从而找出主要因素和专案的方法称为 ___
A. 亲和图；
B. 鱼骨图；
C. 排列图；
D. 关联图
【单选题】
是一种研究成对出现的、两组相关数据之间关系的图示工具是 ___
A. 散布图；
B. 鱼骨图；
C. 排列图；
D. 关联图
【单选题】
用来区分由异常原因引起的波动、或是由过程固有的随机原因引起的偶然波动的一种工具是 ___
A. 直方图；
B. 控制图；
C. 排列图；
D. 关联图
【单选题】
下面属于推断性解析方法的是 ___
A. 直方图；
B. 5-WHY分析法；
C. 排列图；
D. 关联图
【单选题】
为消除已发现的不合格或其他不期望情况的原因所采取的措施是？___
【单选题】
为消除已发现的不合格所采取的措施是？ ___
【单选题】
为消除潜在不合格或其他潜在不期望情况的原因所采取的措施 ___
【单选题】
需到商品车库返修且造成经济损失在5万元以上或对发送商品车造成较大影响的是 ___
【单选题】
当班发现3台车后背门左上部与侧围间隙大V2项，属于？ ___
【单选题】
为使不合格产品符合要求而对其所采取的措施 ___
【单选题】
为使不合格产品满足预期用途而对其所采取的措施。 ___
【单选题】
为使不合格产品符合不同于原有的要求而对其等级的改变 ___
【单选题】
对使用或放行不符合规定要求的产品的许可。 ___
【单选题】
排查或当班全检时发现5台以上A/B类故障，是属于 ___
【单选题】
海因利希法则诞生于哪个国家___
A. 中国；
B. 英国；
C. 美国；
D. 日本
【单选题】
在卫生管理方面，设备管理要求对从设备中喷出、泄露、发散出来的有毒有害物质，要切断（ ）对策___
A. 动力；
B. 根源和局部；
C. 电力；
D. 能源
【单选题】
在环境管理方面，设备管理要求必须通过计划、设计、制作、安装、（ ）等各阶段，积极采取安全、公害防止措施，将环境污染防患于未然 ___
【单选题】
以下哪些不属于容易引发设备灾害的三大情况___
A. 异常处理时错误动作与操作；
B. 无视或忽视慢性不良状态；
C. 人为破坏；
D. 保全作业时出现失误
【单选题】
生产经营单位不得以任何形式，与从业人员订立免除或减轻其对从业人员因生产安全事故伤亡依法应承担的（ ）的劳动合同协议___
A. 法律责任；
B. 行政责任；
C. 民事责任；
D. 经济责任
【单选题】
安全帽的主要作用是： ___
A. 头部避免受物体打击或撞击；
B. 部免受火焰、腐蚀性烟雾、粉尘以及恶劣气候条件下的伤害；
C. 使头部、毛发免受有害物质污染，防止头部卷入运动的机器设备中；
D. 以上全部
【单选题】
5S中整理的含义是指： ___
A. 需要的东西和不需要的东西加以区分；
B. 弃或处理不需要的东西；
C. 理所需要的东西；
D. 提高人员安全意识
【单选题】
在安全管理3E原则中，着重于解决物的不安全状态问题的原则是：___
A. 安全教育；
B. 安全技术；
C. 安全管理 ；
D. 安全监督
【单选题】
一般情况下，机器的可靠性 （ ） 人的可靠性，实现生产的机械化和自动化，就可将人从机械的危险点和危险环境中解脱出来，从根本上提高人机系统可靠性。___
A. 大于等于
B. 不确定
C. 等于
D. 小于
【单选题】
对操作钻床、铣床、车床等旋转设备来说，使用线织手套有被铣刀、钻头缠住的危险，所以这种操作。 ___
A. 可以戴手套
B. 禁止戴手套
C. 戴不戴都无所谓
D. 没有规定要戴手套
【单选题】
对路径改善着眼点描述不正确的是 ___
A. 是否能拉近作业台
B. 回程是否会发生步行
C. 作业是否标准；
D. 是否能整理成一个作业台作业
【单选题】
对路径理想姿态的叙述不正确的是 ___
A. 作业编成尽可能BLOCK化或按顺序依次进行;避免出现迂回作业；
B. 部品和工具尽可能在作业点位置或去作业点的过程中；
C. 拿取部品和工具做到在去下一作业点的过程中一次完成；
D. 通过导入自动化助力设备，使作业更加轻松。
【单选题】
作业观察不需要的工具是 ___
A. 秒表
B. 米尺
C. 路径分析表
D. 标准作业书
【单选题】
对于现场作业观察采用工作抽样法叙述不正确的是 ___
A. 将作业分成几类
B. 决定测量时间间隔；
C. 对作业进行连续测时
D. 观察点数少容易产生误差
【单选题】
低无法加价值作业不包括 ___
A. 紧固螺栓
B. 搬运零件
C. 等待
D. 整理料箱
【多选题】
KYT活动可结合 开展； ___
A. 虚惊事件；
B. 作业前KY；
C. 事故快报；
【多选题】
事故发生的直接原因是 ； ___
A. 人的不安全行为；
B. 物的不安全状态；
C. 规章制度不完善 ；
D. 工作交接不清；
【多选题】
___
A. 单位作业
B. 作业一人区作业
C. 主体作业
D. 附随作业
【多选题】
什么样的作业内容可以作成标准作业书编成 ___
A. 车辆装配作业
B. 焊装调整作业
C. 涂装涂胶作业
D. 总装返修作业
【多选题】
什么样的作业内容可以作成流程标准作业书 ___
A. 部品来料检查
B. 总装电器返修
C. 整车商品化检查
D. 保全故障处理
【多选题】
标准作业书编成维护的重点 ___
A. 标准作业书（编成）的顺序和路径是否有浪费
B. 部品的布局是否按顺序而设定的
C. 部品布局是否按照动作四原则
D. 充实度如何
【多选题】
合理化课题的选择可以来自以下哪些方面？ ___
A. 质量；
B. 成本；
C. 安全；
D. 生产效率
【多选题】
合理化改善的特点包括以下哪些方面？ ___
A. 明显的自主性；
B. 广泛的群众性；
C. 高度的民主性；
D. 严密的科学性
【多选题】
解析方法分类有： ___
A. 描述性解析方法
B. 语言文字解析方法
C. 推断性解析方法
推荐试题
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
