【单选题】
在正弦交流电的解析式i=ImSin(ωt +φ)中，φ表示___
A. 频率
B. 相位
C. 初相位
D. 相位差
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
正弦交流电压u=100Sin(628t + 600)V，它的最大值为___。
A. 100 V
B. 100 V
C. 60V
D. 628 V
【单选题】
能表示容性电路电压与电流关系的相量图是___。
【单选题】
电路中___定律指出：流入任意一节点的电流必定等于流出该节点的电流。
A. 欧姆
B. 基尔霍夫电流
C. 楞次
D. 基尔霍夫电压
【单选题】
已知电源电压为12 V ,四只相同灯泡的工作电压都是6 V，要使灯泡都能正常工作，则灯泡应___
A. 全部串联
B. 两只并联后与另两只串联
C. 两两串联后再并联
D. 全部并联
【单选题】
用戴维南定理分析电路“入端电阻”时，应将内部的电流源___处理。
【单选题】
任何一个含源二端网络都可以用一个适当的理想电压源与一电阻___来代替。
A. 串联
B. 并联
C. 串联或并联
D. 随意联接
【单选题】
用交流电流表测得交流电流10A，则电路中电流的最大值为___。
A. 10A
B. 14.1A
C. 20A
D. 70.7A
【单选题】
则电路的总电流I为___。
A. 20A
B. 0 A
C. 14.1A
D. 50A
【单选题】
STTL数字集成电路与CMO数字集成电路相比突出的优点是___。
A. 微功耗
B. 高速度
C. 高抗干扰能力
D. 电源范围宽
【单选题】
A+BC=___。
A. A+B
B. A+C
C. （A+B）（A+C）
D. B+C
【单选题】
五个D触发器构成环形计数器，其计数长度为___。
【单选题】
确定正弦量的三要素为 ___。
A. 相位、初相位、相位差
B. 最大值、频率、初相角
C. 周期、频率、角频率
【单选题】
当电压为5V时,导体的电阻值为5欧,那么当电阻两端电压为2V时,电阻值为___欧。
【单选题】
对称负载接成星形时,三相总电流___。
A. 等于零
B. 等于其中一相电流的三倍
C. 等于其中一相电流。
【单选题】
一段有源支路如图1所示，AB两端的电压UAB为___。
A. 10 V
B. —2V
C. 2V
D. —10V
【单选题】
如图2电路中，等效电阻=___
A. 150Ω
B. 900Ω
C. 600Ω
D. 100Ω
【单选题】
电流表的读数是4A，则电路中电流表的读数是 ___
【单选题】
在R、L、C串联电路中，已知＝3Ω，＝5Ω，＝8Ω，则电路的性质为 ___。
A. 感性
B. 容性
C. 阻性
D. 不能确定
【单选题】
工业生产中大量的设备均为感性负载，功率因数往往很低，常采取___的方法来提高电网的功率因数。
A. 并联电容
B. 串联电容
C. 串联电感
D. 并联电感
【单选题】
交流电压表及电流表指示的数值是___
A. 平均值
B. 有效值
C. 最大值
D. 瞬时值
【单选题】
RLC串联电路发生谐振，，R=10Ω，Ω，则谐振时的感抗为___
A. 10Ω
B. 40Ω
C. 20Ω
D. 30Ω
【单选题】
RL从电路获得最大功率，此时RL=___。
【单选题】
使用电解电容时___。
A. 负极接高电位，正极接低电位
B. 正极接高电位，负极接低电位
C. 正极接高电位，负极也可以接高电位
D. 不分正负极
【单选题】
开关接1时，电压表的读数为___。
A. 0V
B. 0.2V
C. 1.96V
D. 2V
【单选题】
开关接2时，电流表的电流为___。
A. 0A
B. 10A
C. 0.2A
D. 约等于0.2A
【单选题】
开关接1时，电流表中流过的短路电流为___。
A. 0A
B. 0.2A 图5
C. 10A
D. 约等于0.2A
【单选题】
正弦交流电常用的表达方法有___。
A. 解析式表示法
B. 波形图表示法
C. 相量表示法
D. 以上都是
【单选题】
电感两端的电压相位超前电流___。
A. 90°
B. 180°
C. 360°
D. 30°
【单选题】
电容两端的电压相位滞后电流___。
A. 30°
B. 90°
C. 180°
D. 360°
【单选题】
应用戴维南定理求含源二端网络的输入等效电阻是将网络内各电动势___
【单选题】
LC 选频振荡电路，当电路频率等于谐振频率时，电路性质为___。
A. 电阻性
B. 感性
C. 容性
D. 纯电容性
【单选题】
阻值为4Ω的电阻和容抗为3Ω的电容串联，总复数阻抗为___
A. 3+j4
B. 3-j4
C. 4+j3
D. 4-j3
【单选题】
电动势为10V，内阻为2Ω的电压源变换成电流源时，电流源的电流和内阻是___
A. 10A，2Ω
B. 20A，2Ω
C. 5A，2Ω
D. 2A，5Ω
【单选题】
电流为5A，内阻为2Ω的电流源变换成一个电压源时，电压源的电动势和内阻为___
A. 10V，2Ω
B. 2.5V，2Ω
C. 0.4V，2Ω
D. 4V，2Ω
【单选题】
额定电压都为220V的40W、60W、100W三灯泡串联在220V的电源中，它们的发热量由大到小排列为___
A. 100W 60W 40W
B. 40W 60W 100W
C. 100W 40W 60W
D. 60W 100W 40W
【单选题】
在正弦交流电的解析式i=ImSin(ωt +φ)中，φ表示___
A. 频率
B. 相位
C. 初相位
D. 相位差
【单选题】
正弦交流电压u=100Sin(628t + 600)V，它的最大值为___。
A. 100 V
B. 100 V
C. 60V
D. 628 V
推荐试题
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.
【多选题】
Which two storage configurations on the source server are unsupported with VMware Converter? (Choose two.)___
A. Linux LVM
B. software RAID
C. GPT/MBR hybrid disks
D. Windows basic volumes
E. Windows dynamic volumes
【多选题】
Which two statements about vCenter HA are correct? (Choose two.)___
A. ESXi 5.5 or later is required.
B. vCenter HA network latency between nodes must be less than 50 ms.
C. NFS datastore is supported.
D. It must be deployed on a 3
E. SXi host cluster with DRS enabled.
【多选题】
An attempt to delete NFS datastore from a ESXi host returns the error: Sysinfo error on operation returned the following status:< Busy> Which two statements could explain this failure? (Choose two.)___
A. NFS datastore is a part of Storage DRS Cluster.
B. NFS.VolumeRemountFrequency value is set to 30.
C. Storage I/O Control is enabled on NFS datastore.
D. NFS datastore has running or registered virtual machines.
【多选题】
An administrator finds that the Microsoft Exchange virtual machines are exhibiting network latency. What two in-guest changes can help decrease latency? (Choose two.)___
A. LRO
B. TSO
C. SR-IOV
D. PVRDMA
【多选题】
Which two types of iSCSI adapters require VMkernel networking configuration? (Choose two.)___
A. dependent hardware
B. in-guest
C. software
D. independent hardware
【多选题】
Which two statements are true for NFS v4.1 firewall behavior? (Choose two.)___
A. It closes port 2049.
B. It sets allowed. All flag to TRUE.
C. It sets allowed. All flag to FALSE.
D. It opens port 2049.
【多选题】
A vSphere Administrator attempts to enable Fault Tolerance for a virtual machine but receives the following error: Secondary VM could not be powered on as there are no compatible hosts that can accommodate it. What two options could cause this error? (Choose two.)___
A. The other ESXi host(s) are in Maintenance Mode.
B. Hardware virtualization is not enabled on the other ESXi host(s).
C. The other ESXi host(s) are in Quarantine Mode.
D. Hardware MMU is enabled on the other
E. SXi host(s).
【多选题】
Storage capabilities be populated in what two ways? (Choose two.)___
A. The administrator can use tags to describe capabilities.
B. Default capabilities are provided by vCenter Server.
C. Datastores can advertise their capabilities through VAAI.
D. Datastores can advertise their capabilities through VASA.
【多选题】
In network troubleshooting it is important to know what upstream switch the ESXi host is connected to. Which two features does ESXi provide to help identify the upstream switch? (Choose two.)___
A. Promiscuous mode
B. DPM
C. LLDP
D. CDP
【多选题】
Virtual Volumes supports which three VMware features? (Choose three.)___
A. Instant Clones
B. Distributed Resource Scheduler
C. Linked Clones
D. vMotion
E. Storage Distributed Resource Scheduler
【多选题】
vSphere DRS helps to balance virtual machines with available resources in a vSphere cluster. What three types of resources can be taken into account for balancing? (Choose three.)___
A. CPU
B. physical NIC saturation of an ESXi host
C. virtual NIC saturation of a virtual machine
D. RAM
E. storage latency
【多选题】
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)___
A. vSAN Advanced license or higher
B. vSAN stretched cluster
C. at least six hosts contributing storage
D. deduplication and compression
E. all flash configuration
【多选题】
When using "Cluster resource percentage" for host failover capacity in vSphere HA Admission Control, the total resource requirements are calculated from which two values? (Choose two.)___
A. Total vCPUs assigned to each VM.
B. Average CPU usage on each VM over time.
C. Memory reservations on each VM.
D. Total memory assigned to each VM.
E. Average active memory on each VM over time.
F. CPU reservations on each VM.
【多选题】
Which are four attributes of the Active vCenter HA node? (Choose four)___
A. It uses the vCenter HA network to communicate with the Witness node.
B. It constantly replicates vPostgres data with the Witness node.
C. It uses a public IP address for the management interface.
D. It runs the active vCenter Server Appliance instance.
E. It uses the vCenter HA network for replication of data to the Passive node.
F. It provides a quorum to protect against split-brain situations.
【多选题】
Which are two vCenter Server two-factor authentication methods? (Choose two.)___
A. RSA SecurID
B. Smart Card
C. SAML
D. Symantec VIP
【多选题】
An administrator is creating VMkernel adapters on an ESXi 6.5 host and wants to create separate VMkernel adapters for every type of traffic in the default TCP/IP stack. Which three types of traffic can be explicitly enabled on a separate VMkernel adapter? (Choose three.)___
A. Virtual SAN traffic
B. NFS traffic
C. vMotion traffic
D. vSphere HA traffic
E. Fault Tolerance logging traffic
【多选题】
When migrating a Windows vCenter Server 6.0 to the vCenter Server Appliance 6.5, which two will be migrated by default? (Choose two.)___
A. Local Windows OS users and groups
B. Configuration
C. Custom ports
D. FQDN
E. Historical and Performance data
【多选题】
Which three types of Content Libraries exist within vSphere 6.5? (Choose three.)___
A. Remote Content Library
B. Published Content Library
C. Local Content Library
D. Shared Content Library
E. Subscribed Content Library
【多选题】
An administrator cannot enable multi-processor Fault Tolerance (SMP-FT) for a virtual machine. Which are two possible causes for this? (Choose two.)___
A. The virtual machine is running on a vSAN datastore.
B. The Fault Tolerance network is using a 10Gbit uplink.
C. The virtual machine has 6 vCPUs assigned.
D. The virtual machine has a 1TB VMDK attached.
E. The virtual machine has snapshots present.
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
