刷题
导入试题
【多选题】
高层建筑火灾供水方法主要有 ___。(中)
A. 启动固定消防水泵供水
B. 利用水泵接合器向室内管网补充供水
C. 通过移动式消防水泵直接向火场供水
D. 通过消防车直接向火场供水
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
ABCD
解析
暂无解析
相关试题
【多选题】
固移结合,可以利用消防车通过水泵接合器给室内管网供水,以增加管网的___。(易)
A. 水压
B. 水量
C. 效率
D. 用途
E. 强度
【多选题】
扑救地铁火灾时,现场通信的主要方法有___。(难)
A. 设有移动通信装置的现场,利用移动电话同地面保持通信联系
B. 利用头盔通信电台和地铁内部有线通信设备进行现场通信
C. 在每层设立通信站,作接力通信或设置有线通信
D. 使用简单的灯语、旗语、绳语、人力等通信方法
【多选题】
公路交通事故救援难度大的原因是___。(中)
A. 事故的偶然性大
B. 地点、时间不定
C. 事故类型多样,救援难度大、技术要求高
D. 事故造成道路堵塞,难以到达
E. 报警人延误报警时机
【多选题】
在建筑物倒塌事故处置中,对救援人员行动安全的要求是___。(难)
A. 不应进入建筑结构已经明显松动的建筑物内部
B. 不得登上已受力不均衡的阳台、楼板、屋顶等部位
C. 不准冒险进入非稳固支撑的建筑废墟下面
D. 冒险进入已经明显松动的建筑物内部实施救人
E. 利用大型设施进行施救
【多选题】
建筑物倒塌事故处置中,救人的顺序是___。(中)
A. 由深入浅
B. 由外向内
C. 先易后难
D. 先重伤后轻伤
E. 先救人后救物
【多选题】
建筑物倒塌事故处置中,救生排险的主要措施有___。(难)
A. 迅速清除现场障碍,确保现场拥有一个急救平台和供救援车辆出入的通道
B. 立即疏散建筑结构受到影响,有可能倒塌的建筑物内人员
C. 协助供水、供电、供气部门切断倒塌建筑的水、电、气供应
D. 对现场有可能再次发生倒塌的建筑物要采取加固或事先拆除等措施
E. 使用开花或喷雾水枪扑灭事故次生火灾
【多选题】
建筑物倒塌事故处置中,救生排险的主要措施有___。
A. 迅速清除现场障碍,确保现场拥有一个急救平台和供救援车辆出入的通道
B. 立即疏散建筑结构受到影响,有可能倒塌的建筑物内人员
C. 协助供水、供电、供气部门切断倒塌建筑的水、电、气供应
D. 对现场有可能再次发生倒塌的建筑物要采取加固或事先拆除等措施
E. 使用开花或喷雾水枪扑灭事故次生火灾
【多选题】
建筑物倒塌事故处置中,救人的顺序是___。(中)
A. 由深入浅
B. 由外向内
C. 先易后难
D. 先重伤后轻伤
E. 先救人后救物
【多选题】
建筑倒塌事故处置程序与措施主要包括___。(难)
A. 侦察检测
B. 进行人员和任务分工,快速展开救援行动
C. 救生排险
D. 做好保障
E. 现场急救
【多选题】
建筑物倒塌事故处置中,救生排险的主要措施有___。(中)
A. 迅速清除现场障碍,确保现场拥有一个急救平台和供救援车辆出入的通道
B. 立即疏散建筑结构受到影响,有可能倒塌的建筑物内人员
C. 协助供水、供电、供气部门切断倒塌建筑的水、电、气供应
D. 对现场有可能再次发生倒塌的建筑物要采取加固或事先拆除等措施
E. 使用开花或喷雾水枪扑灭事故次生火灾
【多选题】
建筑倒塌事故处置的行动要求为___。(难)
A. 消防部队应加强同公安、医疗救护、水、电、燃气、交通、民政等部门合作,共同实施救援行动。
B. 救援人员要加强行动安全,不应进入建筑结构已经明显松动的建筑物内部;不得登上已受力不均衡的阳台、楼板、屋顶等部位;不准冒险进入非稳固支撑的建筑废墟下面。
C. 加强现场监护工作,严防倒塌事故再次发生。
D. 严禁站在建筑废墟上从上至下进行施救,防止被埋压人员受到二次挤压伤害。
E. 为了尽可能的挽救遇险人员的生命,救援初期,不得直接使用大型铲车、吊车、推土机等施工机械。
【单选题】
凡是能与空气中的氧或其它氧化剂发生化学反应的物质称___。(易)
A. 助燃物
B. 可燃物
C. 着火源
D. 易燃物
【单选题】
___、磷、钾等单质固体物质着火后先熔融,后燃烧。(难)
A. 硫
B. 沥青
C. 石蜡
D. 松香
【单选题】
有些固体可燃物的蒸气压非常小或者难于发生热分解,不能发生蒸发燃烧或分解燃烧,当氧气包围物质的表层时,呈炽热状态发生无火焰燃烧,称为___。(难)
A. 内部燃烧
B. 表面燃烧
C. 放射燃烧
D. 阴燃
【单选题】
___、石蜡、松香等物质先熔融,后蒸发成蒸气,分解、氧化燃烧。(难)
A. 沥青
B. 金属钾
C. 电石
D. 黄磷
【单选题】
在固体可物中,燃点较低、燃烧剧烈的称为___固体。(中)
A. 易燃
B. 难燃
C. 可燃
D. 自燃
【单选题】
通过烟的___等特征,消防人员可以大致判断燃烧物质的种类、火灾阶段、火势蔓延方向等。(中)
A. 温度、浓度
B. 颜色变化
C. 扩散范围
D. 气味、颜色、浓度、流动方向
【单选题】
完全燃烧的燃烧产物都是___气体。(中)
A. 可燃
B. 易燃
C. 毒性
D. 不燃、惰性
【单选题】
火焰的颜色与___有关。(中)
A. 温度
B. 空气
C. 环境
D. 湿度
【单选题】
评价液体火灾危险性的依据是___。(难)
A. 着火点
B. 闪点
C. 燃点
D. 自燃点
【单选题】
易燃可燃液体的闪点___,其火灾危险性就越大。(中)
A. 越高
B. 越低
C. 大于45℃
D. 等于45℃
【单选题】
合成橡胶、合成纤维属于___固体。(中)
A. 易燃
B. 难燃
C. 可燃
D. 不燃
【单选题】
下列___的爆炸属于物理爆炸。(易)
A. 粉尘
B. 炸药
C. 钢瓶
D. 炸弹
【单选题】
凡在时间或空间上失去控制的燃烧所造成的灾害,称为___。(易)
A. 着火点
B. 火灾
C. 爆炸
D. 燃烧
【单选题】
热通过直接接触的物体从温度较高部位传递到温度较低部位的现象,叫做___。(中)
A. 热传导
B. 热对流
C. 热辐射
D. 热传播
【单选题】
热通过流动介质将热量由空间中的一处传到另一处的现象,叫做___。(中)
A. 热传导
B. 热辐射
C. 热对流
D. 热传播
【单选题】
以电磁波形式传递热量的现象称为___。(中)
A. 热传导
B. 热对流
C. 热辐射
D. 热传播
【单选题】
在扑救高层建筑火灾中,疏散和救助遇险和遇难人员的基本顺序是___。(易)
A. 先着火层、再着火上层、后着火下层
B. 先着火上层、再着火层、后着火下层
C. 先着火下层、再着火上层、后着火层
D. 先着火层、再着火下层、后着火上层
【单选题】
扑救高层建筑火灾的战术要求是___(易)
A. 以固为主,固移结合
B. 内攻近战
C. 救人第一
D. 上堵下防
【单选题】
在对密闭房间进行排烟时,为防止发生轰燃应采取的措施是___(难)
A. 逐渐开启排烟口,使用开花水枪掩护
B. 先开启进风口,再开启排烟口
C. 先开启排烟口,再用大量水稀释
D. 减少排烟口数量和面积
【单选题】
扑救原油罐火灾进攻有利时机是:___。(中)
A. 沸溢、喷溅之前
B. 沸溢、喷溅之时
C. 局部发生燃烧
D. 灭火剂准备充足
【单选题】
具有“热波特性”的油品是___。(中)
A. 原油
B. 汽油
C. 柴油
D. 航空煤油
【单选题】
火灾时易发生沸溢、喷溅现象的油品是___。(易)
A. 原油
B. 煤油
C. 柴油
D. 汽油
【单选题】
扑救油罐火灾首选灭火剂是___。(易)
A. 二氧化碳
B. 水
C. 氟蛋白泡沫
D. 干粉
【单选题】
扑救相互毗连的大型商场火灾时,力量部署应以___为主,并设立第二道防线。(易)
A. 下风方向
B. 上风方向
C. 重要目标
D. 蔓延方向
【单选题】
扑救露天堆垛火灾,保护邻近未燃堆垛时,应用___全面覆盖未燃堆垛,降低堆垛表面温度,防止成为新火点。(易)
A. 直流水枪
B. 开花水枪
C. 泡沫管枪
D. 喷雾水枪
【单选题】
对能溶于水的有毒或刺激性气体,可喷射雾状水流,降低其在空气中的___。(中)
A. 毒性
B. 比重
C. 浓度
D. 质量
【单选题】
当发现有大量毒气扩散,且短时间内难以控制时,消防人员应协同有关部门及时疏散可能遭遇毒气侵害的人员,特别要先疏散毒源___受威胁的人员。(易)
A. 上风方向
B. 下风方向
C. 沾染区域
D. 扩散区域
【单选题】
扑救有毒区域的火灾,水源的选用、水枪阵地的选择,在不影响火灾扑救效果的前提下,坚持从___方向进攻为主的原则。(易)
A. 上风
B. 下风
C. 侧上风
D. 侧下风
【单选题】
消防人员在有毒区域进行侦察、排险、灭火等行动时,应以___为单位,不可单独行动。(易)
A. 2~3人
B. 分队
C. 班
D. 小组
推荐试题
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
欢迎使用我爱刷题
×
微信搜索我爱刷题小程序
温馨提示
×
请在电脑上登陆“www.woaishuati.com”使用