相关试题
【判断题】
电路的通断和转换通过电器中的执行部件,主要是靠其触头来实现。
【判断题】
电力机车上主按键开关钥匙只有在辅助开关处于断开位时才能插入或取出。
【判断题】
交一直型电力机车采用交流牵引电动机做牵引动力。
【判断题】
对于电力机车上许可触及的电气仪表和设备均需可靠接地。
【判断题】
机车主电路、辅电路、控制电路之间无任何电的联系。
【判断题】
机车牵引力和运行速度的乘积,就是机车的功率。
【判断题】
任何一种机车,它的功率是一定的,叫做标称功率。
【判断题】
电器是应电能的运用而产生的,所以电机和一般的负载属于电器的范畴。
【判断题】
电器工作时,发热和散热不同时存在于电器发热过程中。
【判断题】
电磁驱动装置是把电能转换为磁能的机构。
【判断题】
对电网来说三相异步电动机是一个电感负载。
【判断题】
电器工作时,发热和散热不同时存在于电器发热过程中。
【判断题】
电弧属于气体放电的一种形式,气体放电分为自持放电与非自持放电两类。
【判断题】
电器触头驱动装置有三种:电驱动、手动、磁驱动。
【判断题】
触头对电器的工作性能、总体结构、尺寸有着决定性的影响。
【判断题】
触头的参数主要有触头的结构尺寸、开距、超程、研距、触头初压力等。
【判断题】
触头闭合后,其接触处有一定的互压力,称为触头压力。
【判断题】
电阻制动是将牵引电机发出的电能转化为热能而消耗掉。
【判断题】
不同的电路应使用不同电压等级的兆欧表来测量其绝缘电阻。
【判断题】
在电子电路中要形成谐振电路,必须有电感和电容两种类型的元件。
【判断题】
三相不对称负载做△接法,其线电压将不对称。
【判断题】
TQG3A型电压传感器利用霍尔效应,采用磁补偿原理,通过霍尔元件实现对直流、交流及脉动电流的电隔离测量,输出信号反比于被测电流。
【判断题】
机车使用串励牵引电机是因为串励电机的特性比较硬,不易空转。
【判断题】
机车换向是通过改变牵引电机端电压极性来实现的。
【判断题】
SS4型电力机车牵引电机采用串励供电方式。
【判断题】
电力机车进行电阻制动时,牵引电机呈他励励磁方式。
【判断题】
93·为适应高速列车运行需要,异步牵引电动机大多采用半悬挂方式(或称架承式悬挂)。
【判断题】
三相异步电动机变极调速就是改变定子绕组的极对数来调速。
【判断题】
SS4型电力机车牵引电机仅采用调压调速。
【判断题】
牵引电机的磁场削弱是为了提高机车的速度。
推荐试题
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
【单选题】
21.接触器的额定电流应不小于被控电路的___。
A. 额定电流
B. 负载电流
C. 最大电流
D. 峰值电流
【单选题】
22.对于___工作制的异步电动机,热继电器不能实现可靠的过载保护。
A. 轻载
B. 半载
C. 重复短时
D. 连续
【单选题】
23.对于△接法的异步电动机应选用___结构的热继电器。
【单选题】
24.对于工作环境恶劣、启动频繁的异步电动机,所用热继电器热元件的额定电流可选为电动机额定电流的___倍。
A. 0.95~1.05
B. O.85~0.95
C. 1.05~1.15
D. 1.15~1.50
【单选题】
25.中间继电器的选用依据是控制电路的___、电流类型、所需触点的数量和容量等。
A. 短路电流
B. 电压等级
C. 阻抗大小
D. 绝缘等级
【单选题】
26中间继电器一般用于___中。
A. 网络电路
B. 无线电路
C. 主电路
D. 控制电路
【单选题】
27.行程开关根据安装环境选择防护方式,如开启式或___。
A. 防火式
B. 塑壳式
C. 防护式
D. 铁壳式
【单选题】
28.根据机械与行程开关传力和位移关系选择合适的___。
A. 电流类型
B. 电压等级
C. 接线型式
D. 头部型式
【单选题】
29.电气控制线路中的停止按钮应选用___颜色。