【单选题】
Stress that is not treated can lead to significant medical illnesses, which ___ can lead to greater stress and even depression (抑郁症).
A. after all
B. in turn
C. on the contrary
D. at least
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
Narcissism (自恋) has its benefits in terms of self-belief and confidence, but it also tends to be ___ risky decision-making.
A. associated with
B. contrasted with
C. reserved for
D. relieved of
【单选题】
When Tom saw his doctor again, she suggested that maybe a more substantial lunch, like a sandwich, might ___ his desire to have snacks in the afternoon.
A. count on
B. cut back on
C. hold on to
D. contribute to
【单选题】
You shouldn’t ___ – let your children make their own decisions.
A. interact
B. abuse
C. startle
D. interfere
【单选题】
This is a huge and difficult project and if you take it up, you ___ many difficulties.
A. like to encounter
B. like encountering
C. are likely to encounter
D. are like to encounter
【单选题】
The ability to live for a long time without water is characteristic ___ the camel.
A. of
B. for
C. about
D. in
【单选题】
Rising sales is a good ___ that this product is well received in the market.
A. response
B. convention
C. indication
D. Influence
【单选题】
When tourists travel abroad, they are sometimes ___ by the local people because the tourists don’t know the real value of products.
A. turned in
B. given chase
C. wrapped up
D. ripped off
【单选题】
The professor’s lecture ___ the capacity of his young audience. They all looked puzzled at him.
A. pointed out
B. went beyond
C. contributed to
D. kept off
【单选题】
We must ___ on the amount of time we use on this project.
A. cut both ways
B. cut in line
C. cut off
D. cut down
【单选题】
We have to be very patient with this experiment. It will take time for some effects to ___ clearly.
A. build up
B. break up
C. clear up
D. show up
【单选题】
Perhaps there is a(n) ___ of truth in both theories, but few of us would ever have the opportunity to find out.
A. lump
B. substance
C. section
D. element
【单选题】
Be careful when you get along with her because she is known for her short ___.
A. temper
B. emotion
C. mood
D. feeling
【单选题】
It seems that wearing less formal clothing to school and work is becoming a(n) ___.
A. trend
B. campaign
C. goal
D. occurrence
【单选题】
You cannot correct children’s bad behavior simply with a (n) ___ or two on the hand or face.
A. slap
B. smash
C. slam
D. strike
【单选题】
Our investigations (调查) ___ something very surprising – many of the employees are underpaid and work overtime all the time.
A. reveal
B. bump
C. rip
D. frustrate
【单选题】
She was James’s faithful assistant, in whom he could have ___ confidence.
A. essential
B. automatic
C. ultimate
D. absolute
【单选题】
If you visit this website, you can ___ the categories to find information about all the universities in that area.
A. observe
B. browse
C. glance
D. look
【单选题】
Making New Year’s resolutions (计划) is a custom that still ___ in this country.
A. prevails
B. attaches
C. descends
D. launches
【单选题】
The military officers were more ___ about their own victory and therefore more willing to predict their enemy’s defeat.
A. appropriate
B. ignorant
C. negative
D. optimistic
【单选题】
___ is no doubt that overwork and much worry caused his illness.
A. It
B. There
C. Here
D. This
【单选题】
___ a day goes by that I don’t receive dozens of junk mails in my email box.
A. None
B. Usually
C. Nearly
D. Hardly
【单选题】
Please trust me. Try this new method ___.
A. you feel very relaxed
B. and you feel very relaxed
C. you will feel very relaxed
D. and you will feel very relaxed
【单选题】
John said Mom was coming back tomorrow, not next week. If this is the ___, we’ll all have to clean the house thoroughly.
A. point
B. norm
C. question
D. case
【单选题】
It is far too late for you to go out and play football, ___ the fact that it’s raining.
A. no doubt
B. despite
C. given
D. not to mention
【单选题】
However, under no circumstances should we ___ our achievements, nor should we regard our accomplishments as unimportant.
A. present
B. perceive
C. exemplify
D. exaggerate
【单选题】
Jane picked up a magazine from the bookshelf and started reading here and there ___.
A. accurately
B. randomly
C. emotionally
D. continually
【单选题】
In many Middle Eastern cultures a deadline is taken as a(n) ___, and such terms should not appear in a purchase contract with businessmen from these countries.
A. target
B. favor
C. honor
D. insult
【单选题】
He is by no means a(n) ___ man. On the contrary, he always departs from customs.
A. disgraceful
B. sophisticated
C. traditional
D. intelligent
【单选题】
Although the nuclear radiation problems remain unsolved, the government’s emphasis has been ___ from coal to nuclear.
A. intended
B. defined
C. attached
D. switched
【单选题】
The psychologist doesn’t say directly, but seems to ___ that emotional maturity and self-stimulation are the key elements for success.
A. inquire
B. imply
C. refer
D. confront
【单选题】
The top floors of a building collapsed, trapping a construction worker in the rubble (瓦砾), but he was ___ and could talk to rescuers.
A. reasonable
B. rational
C. innocent
D. conscious
【单选题】
After ___ research by the local government, officials confidently stated that this area of the sea was much safer than before.
A. extensive
B. durable
C. partial
D. extreme
【单选题】
As the world is becoming global, it is increasingly important that countries work together to ___ international trade.
A. soar
B. rise
C. facilitate
D. prompt
【单选题】
As the technology develops, it is probable that electronic books will start to ___ paper books in the near future.
A. ban
B. exchange
C. employ
D. replace
【单选题】
The man was sentenced to 10 years in prison after he was accused of ___ a senior bank official.
A. bribing
B. frustrating
C. chasing
D. eliminating
【单选题】
Youngsters who drink and smoke, and are often absent from school are far more likely to be ___ from school.
A. forbidden
B. induced
C. expelled
D. disobeyed
【单选题】
大学生适应新的学习、生活环境，很重要的一点就是___。
A. 勇于尝试，不怕失败
B. 培养优良学风
C. 培养和提高独立生活能力
D. 培养自信心。
【单选题】
创新学习是一种以___为基础，采取创造性方法，积极追求创造性成果的学习。
A. 奇思异想
B. 瞬间顿悟
C. 求真务实
D. 求新求变
【单选题】
“知之为知之，不知为不知，是知也。”这句话告诉我们，在学习上一定要培养___的优良学风。
A. 求实
B. 一丝不苟
C. 勤奋
D. 敢为人先
【单选题】
“业精于勤荒于嬉；行成于思毁于随”，这句话说明了学习必须做到___
推荐试题
【单选题】
(76623)钢锯由钢锯架和锯条组成，根据锯齿间的距离，齿距为___毫米为中齿。(1.0分)
A. 1.1
B. 1.4
C. 1.8
D. 2.0
【单选题】
(76624)钢锯由钢锯架和锯条组成，根据锯齿间的距离，齿距为___毫米为细齿。(1.0分)
A. 1.1
B. 1.4
C. 1.8
D. 2.0
【单选题】
(76625)起锯时，锯条与工件表面之间夹角要___一些，以防止崩齿。(1.0分)
【单选题】
(76626)起锯时的锯割行程要___些，压力要小些。(1.0分)
【单选题】
(76627)收锯时，可用___进行锯割，左手拿住没有夹住的那段材料。(1.0分)
A. 单手
B. 双手
C. 前推式
D. 回拉式
【单选题】
(76628)用锉刀对工件表面进行切削加工，使工件达到所要求的尺寸、形状和表面粗糙度的操作叫___。 (1.0分)
【单选题】
(76629)锉削精度可以达到___mm，表面粗糙度可达Ra0.8um。(1.0分)
A. 0.1
B. 0.2
C. 0.3
D. 0.4
【单选题】
(76630)锉削的应用范围很广，可以锉削___、曲面、外表面、内孔、沟槽和各种形状复杂的表面。(1.0 分)
A. 凹凸面
B. 平面
C. S面
D. 任何面
【单选题】
(76631)锉刀的粗细按锉齿的___而定。通常有粗齿、中齿、细齿和油光锉齿之分。(1.0分)
A. 间距大小
B. 齿的高低
C. 齿的厚度
D. 齿角
【单选题】
(76632)锉刀分为普通锉、___和特种锉三类。(1.0分)
A. 方锉
B. 扁锉
C. 半弧锉
D. 什锦锉
【单选题】
(76633)___有大肚方锉、刀锉、椭圆锉、单面齿三角锉等。(1.0分)
A. 普通锉
B. 特种锉
C. 什锦锉
D. 军工锉
【单选题】
(76634)大锉刀的握法分为手掌压锉、手指扣锉、___三类。(1.0分)
A. 手心拉锉
B. 手心推锉
C. 手指按锉
D. 手背平锉
【单选题】
(76635)小锉刀的握法分为掰锉、牵锉、___三类。(1.0分)
【单选题】
(76636)曲面锉削的方法是顺着圆弧锉削，锉刀绕___摆动，从而锉出光滑的曲面。(1.0分)
A. 圆弧外侧
B. 圆弧中心
C. 曲面
D. 平面
【单选题】
(76637)钻孔就是钻头与工件作相对的___和进给运动，从而在实心工件上加工出圆孔。(1.0分)
A. 直钻
B. 回转
C. 左右旋转
D. 深入
【单选题】
(76638)钻___孔时，要经常退出麻花钻，这样能把切屑带出，同时切削液能起到更好的作用。(1.0分)
【单选题】
(76639)在圆柱形工件上钻孔，一般用___字形铁装夹工件。(1.0分)
【单选题】
(76640)钻头按构造分类有整体式钻头、___钻头两种。(1.0分)
A. 端焊式
B. 分体式
C. 椭圆式
D. 锥尖式
【单选题】
(76641)中心钻头一般用于钻孔前打中心点用，前端锥面有60°、___、 90°等。(1.0分)
A. 65°
B. 70°
C. 75°
D. 80°
【单选题】
(76642)___是工业制造上使用最广泛的一种钻头。(1.0分)
A. 锥型钻头
B. 圆锥孔钻头
C. 三角钻头
D. 麻花钻头
【单选题】
(76643)常用的标准钻头只刃磨二个___和修磨横刃，但在刃磨以后要保证顶角、横刃斜角以及两主切削 长短相等，左右等高。(1.0分)
A. 主刀面
B. 后刀面
C. 主后刀面
D. 刀背面
【单选题】
(76644)钻头钻削时,破碎或突然停止的现象,可能是进刀___,磨利或钻孔时急冷急热之原故。(1.0分)
【单选题】
(76645)钻头刃磨时要观察火花的均匀性，要及时调整___的大小，并注意钻头的冷却。(1.0分)
【单选题】
(76646)扩孔就是___工件上原有的孔或者用改制的钻头进行孔口的形面加工。(1.0分)
【单选题】
(76647)扩孔工具有普通扩孔钻、圆锥形扩孔钻、___扩孔钻、端面扩孔钻等。(1.0分)
A. 菱形
B. 圆柱形
C. 扁体形
D. 三角形
【单选题】
(76648)在精扩孔口形面时，一般应采用钻床停车后靠主轴惯性来扩孔，以减少___而获得光滑表面。 (1.0分)
A. 温度过高
B. 拉伸
C. 振动
D. 摩擦
【单选题】
(76649)铰孔是在预先钻过孔的工件上用铰刀切去较薄的金属层，从而提高孔的___和减小表面粗糙度。 (1.0分)
【单选题】
(76650)不准用手清除切屑和用嘴吹切屑，应使用钩子和刷子，并尽量在___时清除切屑。(1.0分)
【单选题】
(76651)钻孔时工件应稳妥夹持，防止工件在钻孔过程中___，或在将要钻孔时，因为进给量过大而使工 件甩出。(1.0分)
【单选题】
(76652)攻丝就是用丝锥在圆孔的表面上加工出___。(1.0分)
A. 倒角
B. 内、外螺纹
C. 内螺纹
D. 外螺纹
【单选题】
(76653)套丝是用扳牙在圆柱体的圆周表面上加工出___。(1.0分)
A. 倒角
B. 内、外螺纹
C. 内螺纹
D. 外螺纹
【单选题】
(76654)攻丝前按要求钻好底孔，并在孔口倒角，使攻丝方便而且不产生___和翻边。(1.0分)
【单选题】
(76655)消除金属材料或工件不平、不直或弯曲等缺陷的加工方法，称为___。(1.0分)
【单选题】
(76656)按矫正时被矫正工件的温度分类，矫正可分为冷矫正和___两种。(1.0分)
A. 手工矫正
B. 机械矫正
C. 热矫正
D. 扭转矫正
【单选题】
(76657)将坯料（如板料、条料或管子等）弯成所需要形状的加工方法，称为___。(1.0分)
【单选题】
(76658)渗碳体的含碳量为___%。(1.0分)
A. 0.77
B. 2.11
C. 6.69
D. 7.12
【单选题】
(76659)决定钢淬硬性高低的主要因素是钢的___。(1.0分)
A. 含锰量
B. 含碳量
C. 含硅量
D. 含铜量
【单选题】
(76660)钢的最高淬火硬度，只要取决于钢中___的含碳量。(1.0分)
A. 贝氏体
B. 奥氏体
C. 渗碳体
D. 铁素体
【单选题】
(76661)同一化学成分的情况下，铸铁结晶时的冷却速度对石墨化程度影响___，冷却速度越快，越有利 于石墨化。(1.0分)
【单选题】
(76662)白口铸铁中的碳多数足以___的形式存在，所以其具有高硬度、抗磨性和低脆性。(1.0分)
A. 奥氏体
B. 铁素体
C. 渗碳体
D. 贝氏体
