【填空题】
1.第一、二种工作票和___工作票的有效时间,以批准的检修期为限。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
相关试题
【填空题】
2.工作票签发人的安全责任:a)确认工作必要性和安全性;b)确认工作票上所填安全措施是否正确充备;c)确认所派工作负责人和工作班人员是否___
【填空题】
3.工作负责人的安全责任之一:工作前,对工作班成员进行工作任务、安全措施、技术措施交底和危险点告知,并确认每个工作班成员都___。
【填空题】
4.工作许可人的安全责任之一:工作现场布置的___是否完善,必要时予以补充。
【填空题】
5.专责监护人的安全责任之一:工作前,对___交代监护范围内的安全措施,告知危险点和安全注意事项。
【填空题】
6.工作班成员的安全责任之一:熟悉工作内容,工作流程,掌握___,明确工作中的危险点,并在工作票上履行交底签名确认手续。
【填空题】
7.工作负责人、工作许可人任何一方不得擅自变更___,工作中如有特殊情况需要变更时,应先取得对方的同意并及时恢复。变更情况及时记录在值班日志内。
【填空题】
8.在电气设备上工作,保证安全的技术措施包括:停电;验电;___;悬挂标示牌和装设遮栏【围栏】。
【填空题】
9.对于因平行或临近带电设备导致检修设备可能产生感应电压时,应加装___或使用人保安线,加装的接地线应登录在工作票上,个人保安线由作业人员自装自拆。
【填空题】
10.在配电装置上,接地线应装在该装置导电部分的规定地点,应去除这些地点的___,并划有黑色标记。所有配电装置的适当地点,均应设有与接地网相连的接地端,接地电阻应合格。
【填空题】
11.承发包工程中,工作票可实行“双签发”形式。签发工作票时,双方工作票签发人在工作票上分别签名,各自承担《变电安规》工作票签发人相应的___。
【填空题】
12.几个班同时进行工作时,总工作票的工作班成员栏内,只填明各分工作票的负责人,不必填写___姓名。
【填空题】
14.第一种工作票应在工作前一日送达运维人员,可直接送达或通过传真、局域网传送,但传真传送的工作票许可应待正式工作票到达后履行。临时工作可在工作开始前直接交还给___。
【填空题】
15.一张工作票上所列的检修设备应同时停、送电,开工前工作票内的全部安全措施应___。
【填空题】
1.带电清扫作业人员应站在___位置作业,应戴口罩、护目镜。
【填空题】
2.机具应由了解其性能并熟悉使用知识的人员操作和使用。机具应按出厂说明书和铭牌的规定使用,不准___使用。
【填空题】
3.安全工器具经试验合格后,应在不妨碍___且醒目的部位粘贴合格证。
【填空题】
4.在户外变电站和高压室内搬动梯子、管子等长物,应___放倒搬运,并与带电部分保持足够的安全距离。
【填空题】
5.机器的转动部分应装有___或其他防护设备【如栅栏】,露出的轴端应设有护盖,以防绞卷衣服。
【填空题】
6.遇有电气设备着火时,应立即将有关设备的___。然后进行救火。
【填空题】
7.电动的工具、机具应___或接零良好。
【填空题】
8.连接电动机械及电动工具的电气回路应单独设开关或插座,并装设___,金属外壳应接地。
【填空题】
9.移动式电动机械和手持电动工具的单相电源线应使用___软橡胶电缆,电动工具应做到“一机一闸一保护”。
【填空题】
10.氧气瓶内的压力降到___,不准再使用。用过的气瓶上应写明“空瓶”。
【填空题】
11.承发包工程中,工作票可实行“双签发”形式。签发工作票时,双方工作票签发人在工作票上分别签名,各自承担《变电安规》工作票签发人相应的___。
【填空题】
12.几个班同时进行工作时,总工作票的工作班成员栏内,只填明各分工作票的负责人,不必填写___姓名。
【填空题】
14.第一种工作票应在工作前一日送达运维人员,可直接送达或通过传真、局域网传送,但传真传送的工作票许可应待正式工作票到达后履行。临时工作可在工作开始前直接交还给___。
【填空题】
15.一张工作票上所列的检修设备应同时停、送电,开工前工作票内的全部安全措施应___。
【简答题】
工作期间,工作负责人若需长时间离开工作现场时需如何办理手续
【简答题】
动火工作完毕后,检查现场有哪些要求?工作如何终结?
【简答题】
工作期间工作负责人若因故暂时离开、长时间离开工作现场时,有何规定?
【简答题】
《线路安规》对专责监护人增设要求及工作期间专责监护人临时离开、长时间离开工作现场时,有何规定?
【简答题】
在停电线路上工作时,哪些地点应装设接地线?
推荐试题
【单选题】
What does the dh group refer to?___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ?___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ?___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于