【单选题】
某县通过特许经营方式引进社会资本共同成立了特殊目的公司，由该公司负责合作项目的建设和运营。根据《国务院关于加强地方政府性债务管理的意见》（国发[2014]43号），该县仅对特殊目的公司按约定规则依法承担特许经营权、合理定价、财政补贴等相关责任，不承担投资者或特别目的公司的偿债责任。___
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
根据《国务院关于加强地方政府性债务管理的意见》（国发[2014]43号），一般公共预算收入、政府性基金、专项收入可以作为地方政府发行专项证券还款来源。___
【单选题】
根据《国务院关于加强地方政府性债务管理的意见》（国发[2014]43号），地方政府举借的债务，可以适度归还存量债务。___
【单选题】
根据《国务院关于加强地方政府性债务管理的意见》（国发[2014]43号），政府债务只能通过政府及其部门举借，不得通过企事业单位等举借。___
【单选题】
根据《国务院关于加强地方政府性债务管理的意见》（国发[2014]43号），地方政府举借的债务，可以用于经常性支出。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，地方政府融资平台是指由地方政府出资设立并承担连带还款责任的机关、事业、企业三类法人，不含由中央政府直接投资设立的部门和机构。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，机构融资平台贷款的拨备覆盖率及贷款拨备率可低于一般贷款拨备水平。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，金融机构可接受地方政府以间接形式为融资平台贷款提供的担保。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，某地方政府融资平台自身现金流量占其全部应偿还债务本息比例为65%，该融资平台为现金流基本覆盖平台。___
【单选题】
某银行根据《中国银监会关于加强融资平台贷款风险管理的指导意见》（银监发[2010]110号）的规定，对融资平台贷款计提了贷款损失准备。考虑到融资平台贷款风险较大，短期内难以提足，该银行拟根据贷款损失准备缺口在5年内补足。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，融资平台贷款风险较大，短期内难以提足贷款损失准备的，可根据贷款损失准备缺口分2―3年补足。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，贷款项目在同行业中具有较强的竞争优势，项目本身可收回现金流现值大于贷款账面价值，即使经济环境和所在行业整体盈利能力发生不利变化时，借款主体仍能按期偿还全部本息的融资平台贷款，应归为正常类。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，对违反贷款集中度监管要求的融资平台贷款，应归为关注类。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，金融机构应根据规定的现金流覆盖比例，划分认定全覆盖、基本覆盖、半覆盖和无覆盖平台贷款，并据此计算不同类型融资平台贷款风险权重。其中，全覆盖类风险权重为50%。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，担保主体的责任不随融资平台贷款形态的变化而改变。___
【单选题】
根据《中国银监会关于加强融资平台贷款风险管理的指导意见》规定，金融机构应严格落实贷款“三查”制度，审慎发放和管理融资平台贷款。___
【单选题】
根据国务院办公厅《转发财政部人民银行银监会关于妥善解决地方政府融资平台公司在建项目后续融资问题意见的通知》（国办发[2015]40号）规定，地方各级政府和银行业金融机构要妥善处理融资平台公司在建项目后续融资问题，实施存量和增量统一管理，依法合规进行融资。___
【单选题】
根据《国务院办公厅转发财政部人民银行银监会关于妥善解决地方政府融资平台公司在建项目后续融资问题意见的通知》（国办发[2015]40号）规定，对于在2014年12月31日前已签订具有法律效力的借款合同并已放款，但合同尚未到期的融资平台公司在建项目贷款，银行业金融机构要在全面把控风险、落实信贷条件的前提下，继续根据合同约定发放贷款，不得盲目抽贷、压贷、停贷。___
【单选题】
根据《国务院办公厅转发财政部人民银行银监会关于妥善解决地方政府融资平台公司在建项目后续融资问题意见的通知》（国办发[2015]40号）规定，对于已签合同贷款额不能满足建设需要，且符合国家有关规定并确实没有其他建设资金来源，但又暂时不宜转为政府和社会资本合作模式的融资平台公司在建项目，增量融资需求纳入政府预算管理，由地方政府按法律要求和有关规定发行政府债券解决。___
【单选题】
根据《国务院关于调整和完善固定资产投资项目资本金制度的通知》规定，金融机构在提供信贷支持和服务时，要坚持独立审贷，切实防范金融风险。___
【单选题】
根据《国务院关于调整和完善固定资产投资项目资本金制度的通知》规定，金融机构要根据借款主体和项目实际情况，根据国家规定的资本金制度要求，对资本金的真实性、投资收益和贷款风险进行全面审查和评估，坚持风险可控、商业可持续原则，自主决定是否发放贷款以及具体的贷款数量和比例。___
【单选题】
根据《国务院关于调整和完善固定资产投资项目资本金制度的通知》规定，城市地下综合管廊、城市停车场项目，以及经国务院批准的核电站等重大建设项目，可以在规定最低资本金比例基础上适当降低。___
【单选题】
根据《中国人民银行 银监会关于加大对新消费领域金融支持的指导意见》规定，经银监会批准经营个人汽车贷款业务的金融机构办理新能源汽车和二手车贷款的首付款比例，可分别在15%和25%最低要求基础上自主决定。___
【单选题】
根据《中国人民银行 银监会关于加大对新消费领域金融支持的指导意见》规定，支持养老家政健康消费，加大创业担保贷款投放力度，支持社区小型家政、健康服务机构发展。___
【单选题】
根据《中国人民银行 银监会关于加大对新消费领域金融支持的指导意见》的规定，鼓励银行业金融机构研发标准化网络小额信用贷款，推广“一次授信、循环使用”，打造自助式消费贷款平台。___
【单选题】
根据《关于金融支持服务贸易发展的指导意见》的规定，银行业机构应进一步探索循环贷、年审制等信贷产品，灵活贷款还款方式，降低融资成本。___
【单选题】
根据《关于金融支持服务贸易发展的指导意见》的规定，银行业机构不能与支付机构签订跨境电子商务人民币结算业务协议。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》的规定，银行业金融机构要加强收费管理，持续开展减费让利，对于能在利差中补偿的，不再另外收费。对于必须保留的补偿成本性收费，严格控制收费水平。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》的规定，银行业金融机构要积极支持农业供给侧结构性改革，为新型农业经营主体和农村电商、休闲农业、乡村旅游等新产业新业态提供有效金融服务，稳妥推进农村集体经营性建设用地使用权、农民住房财产权、农村承包土地经营权抵押贷款试点。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》的规定，支持银行业金融机构开展资产证券化、信贷资产流转等业务盘活信贷资源，必要时可先行先试，适当突破监管规定。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》的规定，支持居民投资购房和进城人员购房需求，推动降低库存压力较大的三四线城市房地产库存。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》规定，银行业金融机构要根据相关监管政策要求，继续细化落实小微企业续贷和授信尽职免责制度。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》规定，银行业金融机构应积极运用互联网、大数据、云计算等信息科技手段，缓解银企信息不对称，提高风险识别和定价能力。___
【单选题】
根据《中国银监会关于提升银行业服务实体经济质效的指导意见》规定，严禁民间资本参与发起设立村镇银行。___
【单选题】
根据《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》的规定，鼓励金融机构依托制造业产业链核心企业，积极开展仓单质押贷款、应收账款质押贷款、票据贴现、保理、国际国内信用证等各种形式的产业链金融业务，有效满足产业链上下游企业的融资需求。___
【单选题】
根据《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》规定，金融部门要紧紧围绕《中国制造2025》重点任务和“1+X”规划体系，改进和完善金融服务水平。___
【单选题】
根据《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》的规定，鼓励制造业企业通过银行间市场发行资产支持票据，以及通过交易所市场开展企业资产证券化，改善企业流动性状况。___
【单选题】
根据《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》的规定，金融机构要积极运用银团贷款、并购贷款、项目融资、出口信贷等多种方式，为制造业企业在境外开展业务活动提供多元化和个性化的金融服务。___
【单选题】
根据《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》的规定，鼓励地方政府通过设立产业引导基金、股权投资引导基金，根据政府引导、市场化运作、专业化管理的原则，加大对先进制造业的投资力度。___
【单选题】
《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》要求，大力发展绿色金融业务，促进制造业绿色发展，加强对工业互联网重点项目的金融支持力度，支持制造业个性化定制和服务型制造。___
【单选题】
《中国人民银行、工业和信息化部、银监会、证监会、保监会关于金融支持制造强国建设的指导意见》要求，完善制造业兼并重组的融资服务，鼓励政策性银行、商业银行、股权投资基金以及产业投资基金等参与企业兼并重组，扩大企业兼并重组资金来源。___
推荐试题
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
