【单选题】
1062、___应当包括危险性分折、可能线生的事故特征、应染组织机构与职责、预防措施、应熟处置程序和应急保障等内容。
A. 综合应急预案
B. 专项脑急预案
C. 现场处置方案
查看试卷，进入试卷练习
微信扫一扫，开始刷题
相关试题
【单选题】
1063、碱洗塔检修前的隔离工作要求为___。
A. 放火炬阀关闭可
B. 进料管线加装盲板
C. 与塔体相连的所有管线要加装盲板
【单选题】
1064、《使用有将物品作业场所劳动保护条例》规定，从事视用高毒物品作业的用人单位应当设置淋浴间和更衣室，更并设置清洗，存放或处理从事使用高造物品作业劳动者的工作服、工作鞋帽等物品的专用间。劳动者结束作业时，其使用的工作服。工作鞋缩等物品心须存放在___区城内。
A. 高毒作业
B. 一般离物作业
C. 黄色警示
【单选题】
乙烯装置脱丁烷塔开车时，应在___投用塔顶冷凝器的冷却水防止塔超压。
【单选题】
1066、公用工程系统故障给乙烯装置造成的事故往往是突发性的事故泼及面大、损失大。下列属于公用工程系纯故湖章的是___。
A. 因服入罐液位高造成丙烯机联锁停车
B. 因冷却水压力低造成丙烯机联锁停车
C. 因透平超速造成丙烯机联锁停车
【单选题】
1067、对主营部门要求备案的应急练资料，油练___应将相关资料报主管部门备案。
A. 组织部门(单位)
B. 参演单位
C. 评估人员
【单选题】
啤选通11068、易燃易爆物品。危险化学品，放射性物品等险物品的生产、经营、健运、使用单位应当制定具体)并对生产经营场所、有危》物找品的津筑物、构祝彻及周边环境开展函患排查及时采取措京消除险患防止安生突安事件___。
【单选题】
【1069、低压反应容器和低压储存容器易燃介质或毒性程度为中度险个质属于陕压力容器___。
【单选题】
1070、以下___项，不属于高毒物品目录。
【单选题】
1071、关于换热器内管破裂的原因.下列说法错误的是___。
A. 管材内部存在缺陷
B. 腐蚀减薄造成管子强度降低
C. 换热器处理量小
【单选题】
1072、关于乙烯装置管式裂解炉的防冻措施，下列叙述不正确的是___。
A. 保证燃料气、燃料油、原料管线的伴热畅通
B. 提高排烟温度
C. 排聚停用护汽包液位
【单选题】
中压蒸汽暖管至少___。并确认各任样阀无水排出。
【单选题】
1074、下列不是爆炸性物质的是___。
【单选题】
为了保证运行设备安全安全阀整定压力不得大于压力容器的___压力。
【单选题】
1076、聚解炉运行过程中烧虑阀内漏，主要危害为___。
A. 裂解气排入大气，及烧焦罐，污染环境
B. 裂解气从大阀后倒串，安全隐患
C. 大量急冷油从烧焦阀流出造成急冷油塔液面下降，环境污染
【单选题】
1077、乙烯装置裂解气压缩机透平的工作原理是___。
A. 机械能转为内能
B. 内能转为机械能
C. 内能转化为动能
【单选题】
选1078、在不影响职工工作的情况下，采样点尽可能靠近职工，空气收集器尽量接近职工工作时的___。
【单选题】
1079、安全帽的重量不应超过___0g
【单选题】
1080、有组织废气主要来源有加热炉、工艺炉的___0。
【单选题】
1081、乙幅装置中发生化学爆炸的种类不包括___爆炸。
【单选题】
1082、钢炉严重缺水时可采取以下措施___
A. 严禁向锅炉内上水，应该采取紧急停炉措施
B. 缓慢进水
C. 开安全阀快速降压
【单选题】
1083、洁有危险化学品物料的工作服属于___。
【单选题】
按工作原理区分，乙烯球罐属于___压力容器。
【单选题】
1085新、工艺装置内手提式干材型灭火器的选型及配置规连一般每一配置点的灭火器数最不应少于___个多层构界应分层配置危险的重要场所直增设推车式灭火器。
【单选题】
1086、进入乙烯装置区的电瓶车、铲车应是___。
【单选题】
1087、防护鞋设计是有其特殊保护功能特别是对___的保护。
【单选题】
1088、热泵是指___。
A. 通过做功将热最由低温热源传给高温热源的供热系统
B. 输送热流体的系
C. 输高温流体的泵
【单选题】
1089、在作业场所液化气浓度较高时应藏___。
【单选题】
垫片密封的基本原理是靠外力压票密封垫片使其本身发生___。
【单选题】
1091、在建筑厂房时应留够师决间距、构筑防火墙和隔染三往裸露的金属构件表面涂上防火涂料以及正确安设道风管道修，日的主要是防止建筑燃时的___。
【单选题】
1092、气件期懈仪测定的是可燃气体的___。
【单选题】
[1093、新建、扩建、改建建设工程应当达到抗震设防要求。重大建设工星和可能发生严策次生爽害的建极工程应当按照国务院有关规定进行地震安全性评价并按照___进行抗震证防。
A. 经审定的地震安全性评价报告所确定的抗震设防蔬求
B. 地区地意设防更求
C. 抗黑定法
【单选题】
1094、高心泵启动前出口阀关闭，其目的是防止___。
A. 启动后流体对调节阀的冲击
B. 液体倒流
C. 泵启动时因电机电流过高而烧坏电机
【单选题】
1095、单机试运一般不包括___阶段。
A. 换热器等静设备的试运
B. 机组有负荷运转
C. 机组无负荷运转
【单选题】
1096、使用安全带应注意据动碰拉同时应___。
A. 高挂低用
B. 不论高度挂牢呵
C. 低挂高用
【单选题】
1097、___用于防止燃烧的火炬气中带液体。
A. 干秋矩耀的加热盘管
B. 湿火柜罐的集水包
C. 火炬头下方的分子密封或曲撕密封
【单选题】
【啤选]1098、在处理安全生产事故过程中产生的可能严重污染水体的消防废水、废液___。
A. 可直接排入水体
B. 应采取防止污染措施
C. 少量直接排放
【单选题】
【啤选]1099、火炬系统点燃情况下，禁止下列___情况的发生。
A. 在火炬总管上开口漏入空气
B. 补入氮气
C. 增加火矩头蒸汽供给
【单选题】
[11100、应急准备是针对可能发生的事故为迅进、有序地开展应急行动而预先进行的组织准备和应急___
【单选题】
[单选题]第1101题:噪声治理的三个优先级顺序是___。
A. 降低声源本身的噪音、控制传播途径、个人防护
B. 控制传播途径、 降低声源本身的噪音、个人防护
C. 个人防护、降低声源本身的噪音、控制传播途径
【单选题】
[单选题]第1102题:液化石油气燃烧释放出___,存在中毒危险。
推荐试题
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
